7.1 Harness Removal
1.Remove harness straps from metal junction plate. See figure 5 on page 19 for more help.
Pull the straps through harness slots. Do not remove buckles or harness clip from straps .
Push straps, buckles and harness clip through bottom of seat.
2.Remove crotch strap. See figure 3 on page 19 for more help.
Buckle crotch strap to harness and fasten harness clip together for storage.
3. Metal junction plate and strap are not removable. Push in red adjustment button and pull strap to rear of seat . Snap junction plate in back of seat .
4. Store LATCH. See Section 8.2, Storing LATCH, page 32.
5. Reverse instructions to reinstall. See figure 1 on page 38 for the correct path for the harness.
29