Graco PD247322A Without Built-in Harness, Mass between 13.6 and 45 kg ‡+HLJKWWRLQFKHV

Page 17

7.2 WITHOUT Built-in Harness

Your child must meet all requirements: ‡:HLJKWWROEV

(mass between 13.6 and 45 kg) ‡+HLJKWWRLQFKHV

(96 and 145 cm) in height ‡DSSUR[LPDWHO\\HDUVRIDJH ‡WKHVKRXOGHUEHOWMUST lie across child’s shoulder as shown and the lap portion of the belt is positionned low on the child’s hips. ‡&KLOG¶VHDUVDUHBELOW top of booster seat. ,IWRSVRIHDUVDUHDERYHWRSRIVHDWFKLOGLVWRR large for booster seat.

If child is between 30 and 65 lbs and shoulders are below the upper harness slots, we highly recommend use of the built-in harness for as long as possible (up to 65 lbs).

17

Image 17
Contents Read this Manual Table of Contents Table of Contents Page Properly securing your child in the child restraint Properly routing the vehicle seat belt or LatchRegister Your Child Restraint Model Number Date of Manufacture Purchase DateSecond Hand Child Restraint Features Harness Straps Arm Assembling the Child RestraintClick Click Assembly is now complete ‡DO not Install or USE this Child Page With Built-In Harness Height and Weight LimitationsMass between 13.6 and 45 kg ‡+HLJKWWRLQFKHV Without Built-in Harness‡DQGDUHEHWZHHQDQGLQFKHV Without Back SupportChoosing an Appropriate Vehicle Seat Location Safe Vehicle Seat Belt Systems Vehicle Seat Belt Requirements‡ Lap Belts with Automatic Locking Retractor ALR For Built-in Harness Only‡ Lap Belts Manually AdMusted ‡ Combination LapShoulder Belt with Locking Latch Plate With or Without Built-in Harness‡ Lap Belts with Emergency Locking Retractor ELR Unsafe Vehicle Belt Systems‡ Combination LapShoulder Belt with Retractor ‡ Passive Restraint Lap or Shoulder Belt Mounted on Door‡ Lap Belts Forward of Seat Crease ‡ Passive Restraint Lap Belt with Motorized Shoulder BeltLatch What is LATCH?Page Latch System Using Child Restraint with Built-in Harness Unbuckle harness straps œ To adMust harness straps Page Must Page Securing the Child Restraint in Your Vehicle Lower anchors must be stored when using vehicle beltTighten vehicle seat belt Safety Check for Secure Installation Lay flat and not be twisted With LatchWKH7HWKHUSDJH ‡ Avoid bulky clothing Securing Your Child in the Child RestraintFasten harness clip š. Position harness Remove harness straps Harness Removal or Re-attaching HarnessPage 2QWKHUHDURIWKHVHDWGHWDFKORZHUVHDW Harness Strap Arm Page Using Your Child Restraint Without Built-in Harness Incorrectincorrect Incorrect Incorrect Securing Child & Booster Seat in Vehicle When using with or without the built-in harness Adjusting Head Support7RDGMXVWKHDGVXSSRUWVLGHZLQJV  Removing or Re-attaching Back Support Page Page Page Page Rear View of Child Sitting in Seat Correct Using the Tether Storing Lower Anchors and Tether Latch Important points to remember Airplane UseTo prevent ejection in sudden stop or crash Recline Foot ™ › ž œCare and Maintenance Prevent serious inMury or death Buckle Cleaning ProcessHarness for correct installation before use Bleach To Remove Seat CoverPage Replacement Parts and Warranty