Graco PD247322A owner manual Tighten vehicle seat belt

Page 35

4.Tighten vehicle seat belt

Push down hard with your knee or free hand in the middle of the child restraint . Then pull and tighten the shoulder portion of the lap/shoulder belt.

5.While pulling the shoulder portion of the

ODSVKRXOGHUEHOWOD\WKHVKRXOGHUEHOWLQVLGHWKH opened lock-off and snap the lock-off over the shoulder belt .

Two lock-offs are provided to allow for the seat to be installed on the right or left side of the vehicle seat. Only use one lock-offat a time. NEVER try to use both lock-offs when installing the child restraint.

DO NOT try to close the lock-off over anything but the shoulder portion of the vehicle lap/shoulder belt. If any other part of the belt is in the way then try another seat location.

For more information on how to tighten the belt for your seat belt systemVHH6HFWLRQ &KRRVLQJDQ$SSURSULDWH9HKLFOH6HDW/RFDWLRQ SRU\RXUYHKLFOHRZQHU¶VPDQXDO

35

Image 35

Contents Read this Manual Table of Contents Table of Contents Page Properly securing your child in the child restraint Properly routing the vehicle seat belt or LatchRegister Your Child Restraint Model Number Date of Manufacture Purchase DateSecond Hand Child Restraint Features Harness Straps Arm Assembling the Child RestraintClick Click Assembly is now complete ‡DO not Install or USE this Child Page With Built-In Harness Height and Weight LimitationsMass between 13.6 and 45 kg ‡+HLJKWWRLQFKHV Without Built-in Harness‡DQGDUHEHWZHHQDQGLQFKHV Without Back SupportChoosing an Appropriate Vehicle Seat Location Safe Vehicle Seat Belt Systems Vehicle Seat Belt Requirements‡ Lap Belts with Automatic Locking Retractor ALR For Built-in Harness Only‡ Lap Belts Manually AdMusted ‡ Combination LapShoulder Belt with Locking Latch Plate With or Without Built-in Harness‡ Passive Restraint Lap or Shoulder Belt Mounted on Door Unsafe Vehicle Belt Systems‡ Lap Belts with Emergency Locking Retractor ELR ‡ Combination LapShoulder Belt with Retractor‡ Lap Belts Forward of Seat Crease ‡ Passive Restraint Lap Belt with Motorized Shoulder BeltLatch What is LATCH?Page Latch System Using Child Restraint with Built-in Harness Unbuckle harness straps œ To adMust harness straps Page Must Page Securing the Child Restraint in Your Vehicle Lower anchors must be stored when using vehicle beltTighten vehicle seat belt Safety Check for Secure Installation Lay flat and not be twisted With LatchWKH7HWKHUSDJH ‡ Avoid bulky clothing Securing Your Child in the Child RestraintFasten harness clip š. Position harness Remove harness straps Harness Removal or Re-attaching HarnessPage 2QWKHUHDURIWKHVHDWGHWDFKORZHUVHDW Harness Strap Arm Page Using Your Child Restraint Without Built-in Harness Incorrectincorrect Incorrect Incorrect Securing Child & Booster Seat in Vehicle When using with or without the built-in harness Adjusting Head Support7RDGMXVWKHDGVXSSRUWVLGHZLQJV Removing or Re-attaching Back Support Page Page Page Page Rear View of Child Sitting in Seat Correct Using the Tether Storing Lower Anchors and Tether Latch Important points to remember Airplane UseTo prevent ejection in sudden stop or crash Recline Foot ™ › ž œCare and Maintenance Prevent serious inMury or death Buckle Cleaning ProcessHarness for correct installation before use Bleach To Remove Seat CoverPage Replacement Parts and Warranty