Graco PD247322A owner manual With Latch, Lay flat and not be twisted

Page 37

11.3 With LATCH

Use vehicle belt (not LATCH connectors) for installations with children weighing more than 48 pounds (21.7 kg). NOTE: Some vehicle manufacturers have lower maximum weight ratings for LATCHDQFKRUVVR\RXPXVW consult your vehicle owner’s manual or call the vehicle manufacturer to confirm the limits on your vehicle’s LATCH anchors.

1. Unhook LATCH from storage bars on the VLGHVRIWKHVHDW)RUHDVHRILQVWDOODWLRQH[WHQG LATCH to its maximum length.

	2. Place the child restraint firmly against the back
	of a forward-facing vehicle seat.
	3. Hook LATCH Connectors to vehicle lower
	anchors . Pull firmly on Connectors
	to be sure they are attached. Belt must
	lay flat and not be twisted.
	4. Tighten LATCH by pushing down hard on
	4. Tighten LATCH by pushing down hard on
	child restraint and pulling the adjustment belt .
	5. If you need to remove LATCHWRUHDGMXVW
	push button on LATCH buckle to loosen strap.

37

Image 37

Contents Read this Manual Table of Contents Table of Contents Page Properly securing your child in the child restraint Properly routing the vehicle seat belt or LatchRegister Your Child Restraint Model Number Date of Manufacture Purchase DateSecond Hand Child Restraint Features Harness Straps Arm Assembling the Child RestraintClick Click Assembly is now complete ‡DO not Install or USE this Child Page With Built-In Harness Height and Weight LimitationsMass between 13.6 and 45 kg ‡+HLJKWWRLQFKHV Without Built-in Harness‡DQGDUHEHWZHHQDQGLQFKHV Without Back SupportChoosing an Appropriate Vehicle Seat Location Safe Vehicle Seat Belt Systems Vehicle Seat Belt Requirements‡ Lap Belts Manually AdMusted For Built-in Harness Only‡ Lap Belts with Automatic Locking Retractor ALR ‡ Combination LapShoulder Belt with Locking Latch Plate With or Without Built-in Harness‡ Lap Belts with Emergency Locking Retractor ELR Unsafe Vehicle Belt Systems‡ Combination LapShoulder Belt with Retractor ‡ Passive Restraint Lap or Shoulder Belt Mounted on Door‡ Lap Belts Forward of Seat Crease ‡ Passive Restraint Lap Belt with Motorized Shoulder BeltLatch What is LATCH?Page Latch System Using Child Restraint with Built-in Harness Unbuckle harness straps œ To adMust harness straps Page Must Page Securing the Child Restraint in Your Vehicle Lower anchors must be stored when using vehicle beltTighten vehicle seat belt Safety Check for Secure Installation Lay flat and not be twisted With LatchWKH7HWKHUSDJH ‡ Avoid bulky clothing Securing Your Child in the Child RestraintFasten harness clip š. Position harness Remove harness straps Harness Removal or Re-attaching HarnessPage 2QWKHUHDURIWKHVHDWGHWDFKORZHUVHDW Harness Strap Arm Page Using Your Child Restraint Without Built-in Harness Incorrectincorrect Incorrect Incorrect Securing Child & Booster Seat in Vehicle When using with or without the built-in harness Adjusting Head Support7RDGMXVWKHDGVXSSRUWVLGHZLQJV Removing or Re-attaching Back Support Page Page Page Page Rear View of Child Sitting in Seat Correct Using the Tether Storing Lower Anchors and Tether Latch Important points to remember Airplane UseTo prevent ejection in sudden stop or crash Recline Foot ™ › ž œCare and Maintenance Harness for correct installation before use Buckle Cleaning ProcessPrevent serious inMury or death Bleach To Remove Seat CoverPage Replacement Parts and Warranty