Graco PD163434A owner manual Adjusting Head Support/ Harness Straps

Page 49

18.3Adjusting Head Support/ Harness Straps

Failure to properly adjust the harness

straps for your child

increases the risk of serious injury or death in the event of a sharp turn, sudden stop or crash.

•BEFORE adjusting the head support height, have your child lean forward slightly.

•Squeeze the red adjustment handle A on top of seat and pull head support up until it snaps into one of the 6 height positions.

•To lower, squeeze red adjustment handle and push head support down.

•CHECK to make sure it is securely snapped into one of the 6 height positions by pulling up on head support.

When using in rear-facingmode always use one of the bottom 3 height positions B.

When using in forward-facingmode always use one of the top 4 height positions B.

Refer to page 48 for harness strap

placement.49

A

B

Image 49

Contents Child Restraint Smart SeatTMTable of Contents REAR-FACING Page Properly Routing the Vehicle Seat Belt or Latch Page Never Attach two Latch connectors Page Page Model Number Manufactured Purchase Date Register Your Child RestraintCertification For Recall Information If You Need HelpChild Restraint Useful Life Second Hand Child RestraintAttaching Cupholder Attaching Latch Storage CompartmentClick Features Page Base Page Height & Weight Limits Rear-facing with base 5 to 40 lbs .2-18.1 Kg Preterm or Low Birthweight InfantsForward-facing with base 20 to 65 lbs to 29.5 kg Booster Without base 30 to 100 lbs .6 to 45 kg Serious Injury or DEATH. Some seating Vehicle Seat Location RequirementsSafe Vehicle Seat Belt Systems Vehicle Seat Belt RequirementsWith or Without Built-in Harness For Built-in Harness OnlyCombination Lap/Shoulder Belt with Lap Belts with Emergency Locking Retractor ELR Unsafe Vehicle Belt SystemsCombination Lap/Shoulder Belt with Retractor Passive Restraint Lap or Shoulder Belt Mounted on DoorLap Belt with Motorized Shoulder Belt Passive RestraintLatch What is LATCH?Vehicle Lower Anchor Points Seat Crease Vehicle Top Tether REAR-FACINGFORWARD-FACING Latch SystemInstalling Base Using Vehicle Seat Belt Belt VehicleLap Belt Belt must lay flat and not be twisted Installing Base Using LatchPage REAR-FACING Installation Locked FORWARD-FACING Installation Tether Tether USE Latch Storage Tether StorageChest Clip Harness StrapsBuckle Crotch StrapBottom To prevent ejection in sudden stop or crash Body Support on certain modelsTo prevent serious head injury in sudden stop or crash Harness Covers & Crotch Strap Cover on certain modelsUsing Recline FORWARD-FACING Placing Child in Child Restraint Safety CheckChest Clip Buckle To prevent serious injury or death Check Harness SystemRefer to page 48 for harness strap Placement.49 Adjusting Head Support/ Harness StrapsD19.1 Storing Harness Booster InstallationBottom Using Child Restraint in Booster Mode Page Securing Child in Booster Seat and Vehicle Head Support in Booster Mode , pArmrest Shoulder Belt Lap belt Adjusting Head Support in Booster Mode Additional Information Adjusting ArmrestRemoving Seat Cover Airplane Use Care and MaintenanceReplacement Parts Warranty,and