3.1 Removing and Attaching Base |
|
To remove infant restraint, squeeze handle at | ➊ |
back of seat and lift infant restraint from base | |
as shown ➊. |
|
To put infant restraint in base, push infant |
|
restraint down until it clicks into base. Pull up |
|
on infant restraint to be sure it is latched |
|
firmly into base. |
|
3.2 Adjusting Handle
1. Press handle adjustment buttons on both sides of handle .
2. Rotate handle until it ➋clicks into any of the 5 positions:
Position A: MUST be used
when carrying by handle,
Position B,C,D: are convenience
E: positions, Position is the sitting position, NEVER use positions B or C
in the vehicle.
BOTH handle adjustment buttons must pop out to lock handle in place .
3. Push and pull on➌ the handle to be sure it is locked firmly in position.
|
| ➋ |
Carrying | B | ➌ |
A | ||
|
| C |
|
| D |
|
| E Sitting |
10