Graco Bugaboo Stroller manual Basic steps, Chassis, Folding out the chassis and handlebar

Page 10

1. basic steps

eng

chassis

The chassis is the main component of the Bugaboo Gecko. The Bugaboo Gecko frame clicks into the chassis and becomes the base for the bassinet and seat.

The parts are attached to the chassis. The chassis is comprised of the following components:

-axle for the big wheels;

-axle for the swivel wheels with holder;

-handlebar with frame bearers, parking brake and wrist strap.

You also need the following for the assembly:

-2 swivel wheels;

-2 big wheels with pneumatic tires.

Frame completes the chassis for further assembly.

step 1 folding out the chassis and handlebar

a	Place the chassis with the 4 points on the floor.	a

b.Stand with the handlebar in front of you.

c.Hold the handlebar lightly in your hands. Do not push.

d	Pull the 2 white buttons on the inside of the handlebar	d
	towards you.

Image 10

Contents English Español Français Fres engPage English eng Eng Content Before you start IntroductionBox with the bugaboo gecko comprises the following parts Eng Eng Assembly and use Folding out the chassis and handlebar Basic stepsChassis Place the chassis with the 4 points on the floorPlacing the swivel wheels in the holders Swivel wheels‘click’ Big wheels with pneumatic tires Other functionsFitting the big wheels to the axle Deflating the tires Unfolding the chassisInflating the tires ‘click’ ‘click’Push your foot against the axle of the swivel wheels Parking brakeApplying the parking brake Push the parking brake’s handle away from you DownwardsAdjusting the parking brake Releasing the parking brakeFrame Fitting the frame on the chassisPlacing the frame in different positions Turning the frame around Removing the frame from the chassisPick up the frame Practicing Attaching the bassinet fabric to the frame Assembling the bassinetFitting the mattress Fitting the apron See on fitting the sun canopyAssembling the seat Placing the seat fabric on the frameWA R N I N G S Various uses of bassinet and seat BassinetSeat 3 positions areUsing the seat safety belts Using safety beltsAttach the shoulder belts over the child’s shoulders to Waist belts. Tighten the belts to fit the child’s lengthFitting the underseat bag Fitting the under seat bagRough terrain position Going outdoors with the bugaboo geckoCity position Wheel positionFitting the seat Surface that is difficult to traverse, or snow Wrist strapFitting the sun canopy Protection against weather and windSun canopy Attach the elastic bands to the front of the canopy ClampsFitting the rain cover over the sun canopy Rain coverPull out the sun canopy Slide the holes of the rain cover frame over Fitting the rain cover over the sun canopy’s frameFinally, pull the wide, black edge over the foot end Frame Using the air vent in the rain cover Pull the frame apartMosquito net Fitting the mosquito netFolding the chassis and wheels Travelling and storageCollapsing the seat or bassinet Collapsing the seatGrasp the center shaft on which the frame bearers are Cleaning MaintenanceSafety Cleaning the fabricAccessories Present accessories areLimited Warranty Comment