Graco Bugaboo Stroller Protection against weather and wind, Sun canopy, Fitting the sun canopy

Page 32

eng

8. protection against weather and wind

30

The standard version of the Bugaboo Gecko comes with a sun canopy, rain cover and mosquito net, so you can protect the child against the sun, wind and rain, as well as insects. The necessary steps to make the Bugaboo Gecko ready for use in good or bad weather are the same for the bassinet and the seat.

Important The sun canopy, the rain cover and the mosquito net can be used in combination with the seat up to a length of 48 cm/18.9 inch of the upper body of the child (measured from the bottom of the child’s behind to the top of its head).

sun canopy

The sun canopy comprises 2 canopy clamps, 2 removable frames and fabric.

step 1 fitting the sun canopy

a.Fit the bassinet or seat onto the chassis.

b.Fit the sun canopy to the round side of the frame.

c.Pull the sun canopy over the head end of the frame.

d

Attach the 2 canopy clamps on the frame, right beside

d

 

the handles. You should hear a click

 

‘click’

e

Attach the elastic bands to the front of the canopy

e

 

clamps.

 

Image 32
Contents English Español Français Fres engPage English  eng Eng Content Box with the bugaboo gecko comprises the following parts IntroductionBefore you start Eng Eng Assembly and use Basic steps ChassisFolding out the chassis and handlebar Place the chassis with the 4 points on the floor‘click’ Swivel wheelsPlacing the swivel wheels in the holders Fitting the big wheels to the axle Other functionsBig wheels with pneumatic tires Unfolding the chassis Inflating the tiresDeflating the tires ‘click’ ‘click’Parking brake Applying the parking brakePush your foot against the axle of the swivel wheels Push the parking brake’s handle away from you DownwardsAdjusting the parking brake Releasing the parking brakeFrame Fitting the frame on the chassisPlacing the frame in different positions Pick up the frame Removing the frame from the chassisTurning the frame around Practicing Fitting the mattress Assembling the bassinetAttaching the bassinet fabric to the frame Fitting the apron See on fitting the sun canopyAssembling the seat Placing the seat fabric on the frameWA R N I N G S Various uses of bassinet and seat BassinetSeat 3 positions areUsing the seat safety belts Using safety beltsAttach the shoulder belts over the child’s shoulders to Waist belts. Tighten the belts to fit the child’s lengthFitting the underseat bag Fitting the under seat bagGoing outdoors with the bugaboo gecko City positionRough terrain position Wheel positionFitting the seat Surface that is difficult to traverse, or snow Wrist strapProtection against weather and wind Sun canopyFitting the sun canopy Attach the elastic bands to the front of the canopy ClampsPull out the sun canopy Rain coverFitting the rain cover over the sun canopy Finally, pull the wide, black edge over the foot end Frame Fitting the rain cover over the sun canopy’s frameSlide the holes of the rain cover frame over Using the air vent in the rain cover Pull the frame apartMosquito net Fitting the mosquito netTravelling and storage Collapsing the seat or bassinetFolding the chassis and wheels Collapsing the seatGrasp the center shaft on which the frame bearers are Maintenance SafetyCleaning Cleaning the fabricAccessories Present accessories areLimited Warranty Comment