Graco Bugaboo Stroller manual Removing the frame from the chassis, Turning the frame around

Page 18

eng

16WA R N I N G S

Only the seat can be used in 3 positions on the frame. The bassinet can only be used horizontally (See WARNINGS Section).

removing the frame from the chassis

a.

Place the frame in the horizontal position.

 

 

Simultaneously press the 2 square, white buttons on the

b

b

 

frame supports to release the frame.

 

c Pick up the frame.

c

d.Place the frame on the floor, resting on the frame supports.

Important The 2 square, white buttons are always used to remove the frame, with the bassinet or the seat, before it is placed on the floor.

turning the frame around

You can turn around the frame to change the seat and bassinet options.

a.

Remove the frame from the chassis.

 

 

 

b

b

While holding the frame in the horizontal position,

 

turn it around.

 

c.

Place it back on the chassis.

 

Image 18
Contents English Español Français Fres engPage English  eng Eng Content Introduction Before you startBox with the bugaboo gecko comprises the following parts Eng Eng Assembly and use Folding out the chassis and handlebar Basic stepsChassis Place the chassis with the 4 points on the floorSwivel wheels Placing the swivel wheels in the holders‘click’ Other functions Big wheels with pneumatic tiresFitting the big wheels to the axle Deflating the tires Unfolding the chassisInflating the tires ‘click’ ‘click’Push your foot against the axle of the swivel wheels Parking brakeApplying the parking brake Push the parking brake’s handle away from you DownwardsAdjusting the parking brake Releasing the parking brakeFrame Fitting the frame on the chassisPlacing the frame in different positions Removing the frame from the chassis Turning the frame aroundPick up the frame Practicing Assembling the bassinet Attaching the bassinet fabric to the frameFitting the mattress Fitting the apron See on fitting the sun canopyAssembling the seat Placing the seat fabric on the frameWA R N I N G S Various uses of bassinet and seat BassinetSeat 3 positions areUsing the seat safety belts Using safety beltsAttach the shoulder belts over the child’s shoulders to Waist belts. Tighten the belts to fit the child’s lengthFitting the underseat bag Fitting the under seat bagRough terrain position Going outdoors with the bugaboo geckoCity position Wheel positionFitting the seat Surface that is difficult to traverse, or snow Wrist strapFitting the sun canopy Protection against weather and windSun canopy Attach the elastic bands to the front of the canopy ClampsRain cover Fitting the rain cover over the sun canopyPull out the sun canopy Fitting the rain cover over the sun canopy’s frame Slide the holes of the rain cover frame overFinally, pull the wide, black edge over the foot end Frame Using the air vent in the rain cover Pull the frame apartMosquito net Fitting the mosquito netFolding the chassis and wheels Travelling and storageCollapsing the seat or bassinet Collapsing the seatGrasp the center shaft on which the frame bearers are Cleaning MaintenanceSafety Cleaning the fabricAccessories Present accessories areLimited Warranty Comment