Graco Bugaboo Stroller manual Unfolding the chassis, Inflating the tires, Deflating the tires

Page 13

b Remove the wheel from the axle; repeat on the other side. b

11

eng

Important The big wheels cannot be removed from the axle if the Bugaboo Gecko’s parking brake is on.

inflating the tires

a. Unscrew the valve’s black valve cap.

b Use an ordinary bicycle pump to inflate the pneumatic tires.

WARNINGS

• Do not inflate to more than 1 bar (15 PSI).

deflating the tires

a. Press the inside of the big wheel’s valve. This releases air.

Important Do not leave the valve caps lying around. Prevent children from putting them in their mouths.

Important The pneumatic tires provide maximum suspension when inflated to the correct pressure. When inflated to the correct pressure you can easily depress the tire with your finger.

unfolding the chassis

Move the handlebar up to unfold the chassis. The big wheels are on the ground. Release the handlebar and click it in position between the big wheels. The chassis is now folded up.

step 4 unfolding the chassis

a. Stand with the handlebar and big wheels in front of you.

b	Pull the two white release knobs towards you and lift.	b
	Release the knobs and raise the handlebar until it
	‘clicks’ into the fastened position.

‘click’ ‘click’

Image 13

Contents Fres eng English Español FrançaisPage English eng Eng Content Before you start IntroductionBox with the bugaboo gecko comprises the following parts Eng Eng Assembly and use Chassis Basic stepsFolding out the chassis and handlebar Place the chassis with the 4 points on the floorPlacing the swivel wheels in the holders Swivel wheels‘click’ Big wheels with pneumatic tires Other functionsFitting the big wheels to the axle Inflating the tires Unfolding the chassisDeflating the tires ‘click’ ‘click’Applying the parking brake Parking brakePush your foot against the axle of the swivel wheels Push the parking brake’s handle away from you DownwardsReleasing the parking brake Adjusting the parking brakeFitting the frame on the chassis FramePlacing the frame in different positions Turning the frame around Removing the frame from the chassisPick up the frame Practicing Attaching the bassinet fabric to the frame Assembling the bassinetFitting the mattress See on fitting the sun canopy Fitting the apronPlacing the seat fabric on the frame Assembling the seatWA R N I N G S Bassinet Various uses of bassinet and seat3 positions are SeatUsing safety belts Using the seat safety beltsWaist belts. Tighten the belts to fit the child’s length Attach the shoulder belts over the child’s shoulders toFitting the under seat bag Fitting the underseat bagCity position Going outdoors with the bugaboo geckoRough terrain position Wheel positionFitting the seat Wrist strap Surface that is difficult to traverse, or snowSun canopy Protection against weather and windFitting the sun canopy Attach the elastic bands to the front of the canopy ClampsFitting the rain cover over the sun canopy Rain coverPull out the sun canopy Slide the holes of the rain cover frame over Fitting the rain cover over the sun canopy’s frameFinally, pull the wide, black edge over the foot end Frame Pull the frame apart Using the air vent in the rain coverFitting the mosquito net Mosquito netCollapsing the seat or bassinet Travelling and storageFolding the chassis and wheels Collapsing the seatGrasp the center shaft on which the frame bearers are Safety MaintenanceCleaning Cleaning the fabricPresent accessories are AccessoriesLimited Warranty Comment