Step 4.
Reattach arm bar. Squeeze both latches below arm bar holes at sides of seat, and insert bar. Push bar in until it snaps in place.
Step 5.
Turn seat upside down. Reattach elastic loops on footrest pad to plastic tabs under footrest.
Step 6.
Thread end of webbing strap
Step 2.
Pull up locking latches at sides of stroller to release handle, and fold handle down.
OR
On some models with a
through “D” rings at back of seat exactly as shown.
Step 7.
Snap the two elastic straps at bottom of seat back around the bar. Fasten the side flaps with
Be sure to secure all snaps, VELCRO®, straps and fabric before using stroller. Pull firmly on waist belt and crotch strap to make sure they are correctly attached.
1
2
Step 3.
3
Be sure fabric does not cover notches in seat sides. Notches must be clear of fabric to securely latch onto frame.
Keep fabric out of notches
To Fold Stroller
Step 1.
Before folding stroller, fold canopy and fully recline seat. Apply brakes to prevent stroller from moving.
The stroller will fold most compactly if seat is installed in the
Close and lock storage latch.
13 | 14 |