Graco PD224061A owner manual Securing Child in Infant Restraint

6.2 Securing Child in Infant Restraint

Failure to properly secure your child in the infant restraint/carrier increases the risk of serious injury or death from suffocation or falls, or in the event of a sudden stop or crash. Even when used only as a carrier, make sure the harness straps are properly secured.

1.	Move infant restraint handle to sitting position (see page 11).
2.	Open harness clip by	™	D
	squeezing both sides and
	unbuckle as shown ™.
2a.	Tilt top of buckle toward
	infant restraint and press in
	at the top of the red button
	and pull tongues out of
	buckle D .
3.	Place your child in the
	infant restraint as shown
	in š, not ›.	š	›
	Pull the harness straps

down over your child.

29