Pacific Digital + and negative terminals, AVR 635 when appropriate upgrades are available

Page 9

Rear Panel Connections

Preamp Outputs: Connect these jacks to an optional, external power amplifier for appli- cations where higher power is desired.

Surround Back/Multiroom Speaker Outputs: These speaker terminals are normally used to power the surround back left/surround back right speakers in a 7.1 channel system. However, they may also be used to power the speakers in a second zone, which will receive the output selected for a multiroom system.

To change the output fed to these terminals from the default of the Surround Back speakers to the Multiroom Output, you must change a setting in the Multiroom Menu of the OSD sys- tem. See page 42 for more information on con- figuring this speaker output. In normal surround system use, the brown and black terminals are the surround back left channel positive (+) and negative (–) connections and the tan and black terminals are the surround back right positive

(+) and negative (–) terminals.

For multiroom use, connect the brown and black SBL terminals to the red and black connections on the left remote zone speaker and connect the tan and black SBR terminals to the red and black terminals on the right remote zone speaker.

RS-232 Port: This jack may be used to con- trol the AVR 635 over a bi-directional RS-232 serial control link to a compatible computer or programmable remote control system. Due to the complexity of programming RS-232 com- mands we strongly recommend that connections to this port for control purposes be made by a trained and qualified technician. This jack may also link to a compatible computer to upgrade the software and operating system of the

AVR 635 when appropriate upgrades are available.

Fan Vents: These ventilation holes are the output of the AVR’s airflow system. To ensure proper operation of the unit and to avoid possi- ble damage to delicate surfaces, make certain that these holes are not blocked and that there is at least three inches of open space between the vent holes and any wooden or fabric surface.

DVD Component Video Inputs: These inputs may be used with any source device equipped with analog Y/Pr/Pb or RGB compo- nent video outputs. The factory default is for these jacks to be a linked to the DVD input, but you may change the setting at any time through the IN/OUT SETUP menu. See page 15 for more information on configuring the component video inputs.

Remote IR Carrier Output: The output of

this jack is the full signal received at the Remote Sensor Window ¯ or input through the Remote IR Input including the carrier frequency that is removed from signals at the Remote IR Output . Use this output to extend IR remote signals to the input of compatible products by direct connection or through the use of optional, external IR “blasters”. If you are in doubt as to which of the two IR Output jacks to use, we recommend that you consult with your dealer or installer, or check with the manufacturer of the external equipment you wish to control.

REAR PANEL CONNECTIONS 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents AVR 635 Audio/ Video Receiver Power for the Digital RevolutionDeclaration of Conformity Table of ContentsDescription and Features High-bandwidth, HDTV-compatible com- ponent video switchingIntroduction Introduction / Safety Information Important Safety InformationUnpacking Front Panel Controls Coaxial Ó More informationTo select between the Optical Digital Audio Outputs Connect these Rear Panel ConnectionsSwitched Outlet AC Power Cord Jack Connect the AC Unswitched OutletAVR 635 when appropriate upgrades are available + and negative terminalsRemote IR Carrier Output The output Light Button Main Remote Control FunctionsChannel Direct Inputs the input Main Remote Control FunctionsMain Remote Control Functions Main Remote Control Functions Multi IR input jack Zone II Remote Control Functions∆ Play Forward/Reverse/Stop K Mute Infrared sensor that is connected to the AVR’sInstallation and Connections Audio Equipment ConnectionsVideo Equipment Connections Any of the Video Audio Inputs Scart A/V ConnectionsVideo Connection Notes Important Note for Adapter CablesImportant Note for the Use SCART-Cinch Adapters If you use a unit providing RGB signals on aSystem and Power Connections Speaker Selection Speaker PlacementUsing the On-Screen Display System ConfigurationSystem Setup Input SetupA L O G Surround Setup Audio SetupSo that the cursor is next to Back to Main Menu line and press the Set Button FNight Mode Settings Using EzSet/EQ Or what the dimensions of your listening room areAutomatic when the menu appears on the screen C K S T E R N U Set Button F Manual SetupN E M a I N Speaker SetupSpeaker Crossover Setting Delay Settings Manual Setup menu Output Level AdjustmentOnce to move to the next line Button on the remoteOn the remote Volume until you can hear the test noise clearlyAdditional Input Adjustments Operation Surround Mode ChartNo delay available Delay time not adjustableMix of the in-phase material of the left and right channels DTS Neo6 MusicBasic Operation Controls and Use of HeadphonesSource Selection Channel/8-Channel Direct InputSurround Mode Selection Digital Audio PlaybackDolby Digital PCM Audio Playback Rear panelMP3 Audio Playback Or front panel *ÓDigital Bitstream Indicators Speaker/Channel IndicatorsSelecting a Digital Source Tape Recording Night ModeFront Panel In/Outputs Puts for Tape OutputsMemory Backup Output Level Adjustment With Source SignalsNormal output level adjustment for Dim FunctionTurn On Volume Level Advanced FeaturesSemi-OSD Settings Front-Panel-Display FadeFull-OSD Time Out Adjustment Advanced Features / Multiroom OperationDigital Auto-Poll Settings Multiroom OperationMultiroom Setup InstallationMultiroom Operation RS-232 ControlBasic Tuner Operation Multiroom Operation / Tuner OperationTuner Operation RDS TuningRDS Operation RDS Display OptionsConfiguring the Remote Preprogrammed Code EntryAppears Learning Commands Automatic Code EntryFappears Learning Codes for an Input Selector Programming the RemoteDevice Priority Changing DevicesMacro Programming Recording a MacroWill scroll to its right. For example, press Erasing a Macro Power On VID 2/TV VID 3/Cable AVR Logic 7 OAt the next menu screen press Read a MacroVolume Punch-Through Punch-Through ConfigurationReturning the Volume Control Settings to Default Operation Red. Press the ⁄¤ Navigation ButtonsRenaming Returning the Channel Control Settings to Default OperationTransport Punch-Through Record Pand Skip Up/DownRenaming Individual Keys ‹/› Navigation Buttons Eas requiredBacklight Options Resetting the RemoteAt this point you have two options See page 34 for more informationAdditional Notes on Configuring and Operating the Remote Processor Reset Troubleshooting GuidePower Switch 1 is pushed Press the AVR SelectorTechnical Specifications Harman Consumer Group International

AVR 635 specifications

The Pacific Digital AVR 635 is an advanced A/V receiver that epitomizes high-fidelity audio and video performance, making it an ideal choice for home theater enthusiasts and audiophiles alike. Known for its robust build quality and cutting-edge features, the AVR 635 offers a remarkable audiovisual experience that caters to a variety of entertainment needs.

One of the standout features of the AVR 635 is its multi-channel audio capabilities. Supporting up to seven channels, the receiver provides rich, immersive sound that enhances movies, music, and gaming experiences. With an impressive output of 100 watts per channel, users can enjoy clear and dynamic sound at a range of volume levels. The receiver also supports advanced audio formats such as Dolby TrueHD and DTS-HD Master Audio, ensuring high-definition audio playback that matches modern video quality.

In addition to powerful audio, the AVR 635 is equipped with sophisticated video processing technologies. The receiver supports upscaling from standard definition to high definition, revitalizing older content for contemporary viewing. It features multiple HDMI inputs, allowing users to connect various gaming consoles, Blu-ray players, and streaming devices with ease. The HDMI version supports 4K video pass-through, ensuring compatibility with the latest television technologies.

Another notable characteristic of the AVR 635 is its user-friendly interface. The on-screen display provides intuitive navigation through setup options and source selections, making it accessible for both novices and seasoned users. The receiver also includes a comprehensive remote control that enables quick adjustments and switching between inputs without hassle.

The AVR 635 boasts network connectivity features, allowing users to access streaming services and online music libraries. With built-in Wi-Fi and Ethernet options, the receiver can connect to home networks effortlessly. This enables streaming from platforms such as Spotify and Pandora, enriching the listening experience even further.

Moreover, the AVR 635 supports room calibration technologies, optimizing sound performance based on the unique acoustics of the environment. This feature ensures that sound reproduction is balanced and tailored, allowing every listener to enjoy the same quality regardless of their seating position.

Overall, the Pacific Digital AVR 635 combines innovative technology, powerful performance, and user-centric features, making it a top choice for anyone looking to enhance their home entertainment system. Whether for watching the latest blockbuster or enjoying a concert, the AVR 635 delivers excellence in every aspect of audio-visual reproduction.
Top Page Image Contents