Arcam AV888, AVR600 manual Using Zone 2, Extended front panel menu, Updating firmware using a PC

Page 23

Using Zone 2 and 3

Zone 2 provides the option for the occupants of the master bedroom, conservatory, kitchen, etc. to view or listen to a different source at a different volume level from the main zone (Zone 1).

Zone 3 provides for a third living space to have a copy of the audio signal in Zone 2 at a different volume level.

Extended front panel menu

Pressing the menu key and holding it for longer than four seconds will bring up the Extended Menu, allowing you to perform the following:

Restore to factory defaults

This option allows you to restore all settings on your AVR600 or AV888 to the defaults that it left the factory with. Note that this also erases any secure backups stored on the unit.

Restore secure backup

Store secure backup

This option allows you to restore from and store to a PIN-protected copy of your settings. The default PIN is 1234.

Change remote code

The default RC5 system code the unit responds to is

16.If required, for example due to another device in your system also using this RC5 system code, it can be changed to 19.

Software versions

Information on the software version of the unit can be found here.

Updating firmware using a PC

Using a PC application (available on request from Arcam), you can update the firmware in your AVR600 or AV888 using the back panel RS232 port connected to your PC.

English

E-21

Page 22 Page 24
Image 23
Page 22 Page 24
Contents N d b o o k AVR surround amplifier / AV processor AVR600 / AV888Class II product Safety GuidelinesImportant safety instructions Safety complianceRespect des consignes de sécurité Class II produitInstructions de sécurité importantes Page Welcome ContentsProfessional Installation? DIY setup?Before you Begin… Interconnect cables PowerStandby power Placing the unitTrademark acknowledgements Two-channel Multichannel, see Audio connectorsConnectors, see Component, S-Video Optical and electrical digitalComponent/RGB Video Composite Hdmi connectorsGeneral Making connectionsDigital audio connectors Zone 3 connectorsZone 2 connectors Front panel Phones socket Phono Analogue audio Front panel AUX inputMCH input Inputs Analogue record outputsEnglish Use the Composite connection if Hdmi DVD playerSatellite receiver CD playerConnecting an iPod using the Arcam rDock Internal wire of the aerial Radio ConnectorsAerial connectors AVR600 only Where fittedConnecting an aerial RLead/rDock Other ConnectorsData connectors Network connectors USB connector RS232 serial connectorRoom English Trigger connectorsInfra-red IR connectors Tip Modulated signal Sleeve GroundSpeaker cables Connecting speakers AVR600 onlyConnecting subwoofers SpeakersSurround left and right CentreSubwoofer Front left and rightSelecting a source Switching onOperation Operating your AVR600 or AV888Extended front panel menu Using Zone 2Updating firmware using a PC Front panel Operation Using the remote control CR102 universal remote controllerInserting batteries into the remote control Useful information Device Mode / Source keysCode blink-back Controlling other devicesIPod commands AMP Device ModeHighlighted menu on the screen TUN Device ModeDVD Device Mode Network commandsAV Device Mode SAT Device ModeVCR Device Mode PVR Device ModeCD Device Mode English Speaker Levels Essential SetupSpeaker types Speaker DistancesUsing a subwoofer Auto speaker SetupAuto speaker setup ProblemsNavigating the setup menu Setup menusTreble Bass Input ConfigGeneral information and system controls General SetupPlii Dimension Plii Centre Width Plii Panorama Spkr Levels Auto SetupSpkr Types Spkr DistanceImportant points to remember Video InputsVideo Outputs Progressive scan playbackFor Stereo sources Zone SettingsMode NetworkTwo-channel source modes Decoding ModesIntroduction Decoding modes Multichannel source modesCalibration Offset SettingsVolume Leveller Dolby Volume is a sophisticated newEnglish Tuner Operation Locking Channels Sirius errorsDefault unlock code is OperationInternet radio stations Network/usb OperationSelecting the playback source USB playbackSubwoofer 2 and Subwoofer External AmplifiersEnglish XLR balanced line outputs AV888 only SW2, SW3Audio outputs Multi-room Set upZone Zone 2 and 3 control outputsZone English Code Learning Customising CR102Key Mover Volume punch-throughCreating Macros Copy a key between Device Modes Mode MoverLocking/Unlocking a specific Device Mode To restore a moved Device Mode key to its original stateResetting the CR102 Mode key IR punch-throughProblem Check that Wired network Volume is always too loudWhen I turn on Switched offContinual improvement policy SpecificationsProblems? Product GuaranteeWorldwide Guarantee Claims under guaranteeDevice code Tables ITC HCMICE IRTSEI RFTSBR SEGKLH AVPGPX KECDKK ADBNTL UPCENG CATCGV DCEUEC AsciSKY+ TPSYES SH215E Issue 4301-7333+0
Related manuals
Manual 74 pages 35.94 Kb Manual 74 pages 48.95 Kb Manual 68 pages 27.09 Kb

AV888, AVR600 specifications

The Arcam AVR600 is a high-performance AV receiver that is designed for audiophiles and home cinema enthusiasts who seek a premium audio and video experience. This receiver stands out with its array of features and technologies that elevate sound quality and user experience.

At the heart of the AVR600 is its high-fidelity amplification system. The receiver is equipped with a robust 7-channel amplification setup, delivering a total output of 120 watts per channel into 8 ohms. This power enables the AVR600 to reproduce dynamic audio with precision, whether it be for movies, music, or gaming. The class G amplifier design offers exceptional efficiency and reduces distortion, ensuring that sound remains clean and focused even at higher volumes.

The AVR600 boasts extensive connectivity options to accommodate various audio and video sources. It features multiple HDMI inputs and outputs supporting 3D video and 4K scaling, providing flexibility for connecting modern devices. The unit also includes analog and digital inputs, a dedicated phono input for vinyl enthusiasts, and support for multi-room audio setups. With its built-in Bluetooth and network streaming capabilities, users can easily access high-resolution audio files from their digital libraries or popular streaming services.

One of the key technologies in the AVR600 is its advanced room correction system, known as Dirac Live. This sophisticated calibration tool analyzes the acoustics of the room and automatically adjusts the output of the receiver to compensate for any sound anomalies. As a result, listeners experience optimized sound tailored to their specific environment, enhancing the overall listening experience.

For video performance, the AVR600 supports a range of formats, including Dolby Atmos and DTS:X, ensuring an immersive home theater experience with enveloping surround sound. It also features advanced video processing capabilities, allowing users to upscale standard-definition and high-definition content to near 4K quality, further enhancing picture clarity.

In terms of user interface, the AVR600 provides an intuitive on-screen display and a well-designed remote control that makes navigating through settings and options seamless. The receiver is also compatible with smartphone apps for additional convenience, allowing users to control playback and settings directly from their mobile devices.

Overall, the Arcam AVR600 is a versatile audio-visual receiver that combines power, connectivity, and advanced technologies to create an exceptional home entertainment experience. Its unique blend of performance and flexibility makes it an excellent choice for those looking to invest in high-quality audio and video solutions for their homes.
Top Page Image Contents