Arcam AVR600, AV888 manual CD Device Mode

��CD Device Mode

The C Device Mode button configures the CR102 to control the CD functions of Arcam CD players, although this can be changed (see page 25). Pressing this button also selects CD as the AVR600/AV888 source.

PToggles power between standby and on.

0…9	Functions as original remote number key.
PHONO	Selects Tape input on the AVR600/AV888.
	SHIFT + Eselects phono input on the
E
	AVR600/AV888.
RPT	Toggles random (‘shuffle’) play on and off.
	SHIFT + R cycles through the repeat
R
	options (track, disc, etc.).
S	Modifies many keys (see individual key
	descriptions, below)
	Selects multichannel (MCH) input on
AUX	AVR600/AV888.

HSHIFT + Hselects AUX input on the AVR600/AV888.

Selects iPOD input on AVR600/AV888.

NET

SHIFT + E selects network (Net) internal

Einput on the AVR600/AV888.

Decrease (–) and increase (+) AVR600/

-+ AV888 volume.

)	Fast rewind
$	Play

&Toggles pause of playback

( Fast forward

!Open/close disc tray

#Stop playback

%Start recording (on products that have this feature)

H	Scans first 10 seconds of each track on CD,
	if supported by the player (Audio search)
FAV+	Starts Program mode
U
FAV-	Clears programmed item
T

��

Navigates track listings if supported by the player.

OK selects the currently highlighted track if supported by the player

Home	(not used)
O
Info	(not used)
B

MChanges the time display modes on Arcam CD player

U(not used)

Cycles through the front panel display’s

Dbrightness options.

SHIFT + Denables RPT A-Bfunctionality if supported by the player.

@Toggles the mute function. By default this key operates the AVR600/AV888 Mute.

]	Press and release to skip back to the
	beginning of the current/previous track.
[	Press and release to skip forwards to the
	beginning of the next track.

E-30