Arcam AV888 manual CR102 universal remote controller, Inserting batteries into the remote control

Page 25

remote control

The CR102 universal remote controller

The CR102 is a sophisticated ‘universal’ backlit remote control that can control up to eight devices. It is pre- programmed for use with the AVR600, AV888 and many other Arcam products (FM/DAB tuners, CD players and DVD players).

With its extensive built-in library of codes, it can also be used with thousands of third party audio-visual components – TVs, satellite and set-top boxes, PVRs, CD players, etc. See the list of codes at the back of this handbook, beginning on page 58.

The CR102 is a ‘learning’ remote, so you can teach it almost any function from an old single-device remote. You can also program the CR102 to issue a sequence of commands (‘macros’) from a single button press.

Using the remote control

Please keep in mind the following when using the remote control:

<Ensure there are no obstacles between the remote control and the remote sensor on the front panel. The remote has a range of about 7 metres. (If the remote sensor is obscured, the Z1 IR remote control input jack on the rear panel is available. Please consult your dealer for further information.)

<Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the remote sensor of the unit.

<Replace the batteries when you notice a reduction in the operating range of the remote control.

E-23

 

 

 

 

 

 

�����

 

 

 

���

����

 

��

���

 

�����

 

 

���

 

���

�����

 

���

 

����

���

���

 

��

���

 

 

 

���

���

 

���

��

 

 

 

 

 

��

 

 

����

 

 

 

����

 

 

 

����

 

 

 

 

 

��

������

��

 

������

����

����

����

 

���

������

 

 

 

 

����

����

����

 

����

����

�����

�����

�����

����

 

�����

 

Inserting batteries into the remote control

1.Open the battery compartment by pressing the button on the back of the handset.

2.Insert four ‘AAA’ batteries into the battery compartment – two facing the top of the unit, and two facing the end, as in the diagram.

3.Lower the end cap onto the plastic locating plate in the handset. This acts as a hinge, and you can now push the end cap firmly into its locked position with a click.

Notes on batteries:

<Incorrect use of batteries can result in hazards such as leakage and bursting.

<Do not mix old and new batteries together.

<Do not use non-identical batteries together – although they may look similar, different batteries may have different voltages.

<Ensure the plus (+) and minus (-) ends of each battery match the indications in the battery compartment.

<Remove batteries from equipment that is not going to be used for a month or more.

<When disposing of used batteries, please comply with governmental or local regulations that apply in your country or area.

English

Image 25
Contents N d b o o k AVR surround amplifier / AV processor AVR600 / AV888Important safety instructions Safety GuidelinesSafety compliance Class II productInstructions de sécurité importantes Class II produitRespect des consignes de sécurité Page Professional Installation? ContentsDIY setup? WelcomeBefore you Begin… Standby power PowerPlacing the unit Interconnect cablesTrademark acknowledgements Connectors, see Audio connectorsComponent, S-Video Optical and electrical digital Two-channel Multichannel, seeGeneral Hdmi connectorsMaking connections Component/RGB Video CompositeZone 2 connectors Zone 3 connectorsDigital audio connectors MCH input Inputs Phono Analogue audio Front panel AUX inputAnalogue record outputs Front panel Phones socketEnglish Satellite receiver DVD playerCD player Use the Composite connection if HdmiConnecting an iPod using the Arcam rDock Aerial connectors AVR600 only Radio ConnectorsWhere fitted Internal wire of the aerialConnecting an aerial Data connectors Network connectors USB connector Other ConnectorsRS232 serial connector RLead/rDockInfra-red IR connectors English Trigger connectorsTip Modulated signal Sleeve Ground RoomConnecting subwoofers Connecting speakers AVR600 onlySpeakers Speaker cablesSubwoofer CentreFront left and right Surround left and rightOperation Switching onOperating your AVR600 or AV888 Selecting a sourceUpdating firmware using a PC Using Zone 2Extended front panel menu Front panel Operation Inserting batteries into the remote control CR102 universal remote controllerUsing the remote control Useful information Device Mode / Source keysCode blink-back Controlling other devicesIPod commands AMP Device ModeDVD Device Mode TUN Device ModeNetwork commands Highlighted menu on the screenAV Device Mode SAT Device ModeVCR Device Mode PVR Device ModeCD Device Mode English Speaker types Essential SetupSpeaker Distances Speaker LevelsAuto speaker setup Auto speaker SetupProblems Using a subwooferNavigating the setup menu Setup menusTreble Bass Input ConfigPlii Dimension Plii Centre Width Plii Panorama General SetupGeneral information and system controls Spkr Types Auto SetupSpkr Distance Spkr LevelsVideo Outputs Video InputsProgressive scan playback Important points to rememberMode Zone SettingsNetwork For Stereo sourcesIntroduction Decoding ModesTwo-channel source modes Decoding modes Multichannel source modesVolume Leveller SettingsDolby Volume is a sophisticated new Calibration OffsetEnglish Tuner Operation Default unlock code is Sirius errorsOperation Locking ChannelsSelecting the playback source Network/usb OperationUSB playback Internet radio stationsEnglish XLR balanced line outputs AV888 only External AmplifiersSW2, SW3 Subwoofer 2 and SubwooferZone Multi-room Set upZone 2 and 3 control outputs Audio outputsZone English Code Learning Customising CR102Creating Macros Volume punch-throughKey Mover Locking/Unlocking a specific Device Mode Mode MoverTo restore a moved Device Mode key to its original state Copy a key between Device ModesResetting the CR102 Mode key IR punch-throughProblem Check that When I turn on Volume is always too loudSwitched off Wired networkContinual improvement policy SpecificationsWorldwide Guarantee Product GuaranteeClaims under guarantee Problems?Device code Tables ICE HCMIRT ITCSBR RFTSEG SEIGPX AVPKEC KLHNTL ADBUPC DKKCGV CATDCE ENGSKY+ AsciTPS UECYES SH215E Issue 4301-7333+0
Related manuals
Manual 74 pages 35.94 Kb Manual 74 pages 48.95 Kb Manual 68 pages 27.09 Kb

AV888, AVR600 specifications

The Arcam AVR600 is a high-performance AV receiver that is designed for audiophiles and home cinema enthusiasts who seek a premium audio and video experience. This receiver stands out with its array of features and technologies that elevate sound quality and user experience.

At the heart of the AVR600 is its high-fidelity amplification system. The receiver is equipped with a robust 7-channel amplification setup, delivering a total output of 120 watts per channel into 8 ohms. This power enables the AVR600 to reproduce dynamic audio with precision, whether it be for movies, music, or gaming. The class G amplifier design offers exceptional efficiency and reduces distortion, ensuring that sound remains clean and focused even at higher volumes.

The AVR600 boasts extensive connectivity options to accommodate various audio and video sources. It features multiple HDMI inputs and outputs supporting 3D video and 4K scaling, providing flexibility for connecting modern devices. The unit also includes analog and digital inputs, a dedicated phono input for vinyl enthusiasts, and support for multi-room audio setups. With its built-in Bluetooth and network streaming capabilities, users can easily access high-resolution audio files from their digital libraries or popular streaming services.

One of the key technologies in the AVR600 is its advanced room correction system, known as Dirac Live. This sophisticated calibration tool analyzes the acoustics of the room and automatically adjusts the output of the receiver to compensate for any sound anomalies. As a result, listeners experience optimized sound tailored to their specific environment, enhancing the overall listening experience.

For video performance, the AVR600 supports a range of formats, including Dolby Atmos and DTS:X, ensuring an immersive home theater experience with enveloping surround sound. It also features advanced video processing capabilities, allowing users to upscale standard-definition and high-definition content to near 4K quality, further enhancing picture clarity.

In terms of user interface, the AVR600 provides an intuitive on-screen display and a well-designed remote control that makes navigating through settings and options seamless. The receiver is also compatible with smartphone apps for additional convenience, allowing users to control playback and settings directly from their mobile devices.

Overall, the Arcam AVR600 is a versatile audio-visual receiver that combines power, connectivity, and advanced technologies to create an exceptional home entertainment experience. Its unique blend of performance and flexibility makes it an excellent choice for those looking to invest in high-quality audio and video solutions for their homes.