3.3 Attaching Canopy
1. Infant restraint comes with four (two on certain models) identical canopy support parts.
Thread one canopy support completely through one sewn tunnel ➍.
2. Slide straight end of a second support into the straight end of the first support ➎.
3.On models with four canopy supports, repeat steps one and two for the other canopy tunnel. The canopy should appear as shown ➏.
4.Attach canopy in the areas between the infant restraint and the handle base ➐.
To remove the canopy, reverse the steps. 
➍
➎
➏
OR
➐
11