The following optional features are found only on certain models:
To Use Bottle Holders*
Two mesh pockets are provided in rear of basket for infant bottle storage.
Bottle
holders
To Use Storage Pocket*
To prevent a hazardous condition, do not place more than 2 lbs (0.9 kg) in the storage pocket.
A storage pocket is located behind the seat back.
Storage
To Change to Swivel or Non-swivel Wheels*
Front swivel wheels lock for use on uneven surfaces such as grass, stones or gravel.
Before locking swivels, first push stroller forward a few feet to ensure the wheels are correctly positioned.
Push buttons up or down, depending on model, to lock or release swivels. Turn swivel to check that it is locked or released.
To Attach the Graco® Safety Seat*
Improper use of this stroller with a carrier may result in serious injury or death.
Do not use this stroller with carriers or safety seats other than Graco® Travel System models.
Read the manual provided with your Graco® Travel System Safety Seat before using the Travel System.
If you do not have the owner’s manual for the Graco® Travel System Safety Seat, call Graco at
Make sure the stroller is fully assembled according to the preceding instructions, with the child’s tray attached.
Step 1.
If the stroller is folded, unfold it and RECLINE the stroller seat back to its lowest position.
Step 2.
Push down on the child’s tray to be sure it is securely attached to the stroller.
Only use safety seat if your stroller has a plastic child’s tray designed for use with a safety seat.
Step 3.
If your child is already in the safety seat because you have been using it as a carrier, make sure child is secured with the harness.
Always secure your child with the safety seat harness when using the safety seat in the stroller.
Step 4.
Move the safety seat handle into the carrying position.
Step 5.
Position the safety seat so that the mounting notches fit over the edge of the tray. Push down on safety seat until the attachment latch snaps onto the tray.
*On certain models
13 | 14 |