Graco 8403 owner manual Final Safety Checks

Page 29

Final Safety Checks

11.Make sure child is secured with the harness according to section 4, “Positioning and Securing Your Child in the Car Bed” (page 19).

12.Make sure that apnea monitors, oxygen tanks, or other medical equipment are not placed inside the car bed. Keep this equipment outside of the car bed, secured under the seat or on the floor.

13.Make sure that the car bed is properly secured by the vehicle seat belt system by performing the following checks EVERY TIME YOU DRIVE WITH YOUR CHILD:

a. Make sure all four feet of the car bed are resting on the vehicle seat.

b. PULL SLOWLY BUT FIRMLY on the side handles of the car bed to make sure the vehicle seat belt does not lengthen at all and that the seat belt is fastened very tightly around the car bed. It should not move side-to-side or front-to-back. If you find that your vehicle seat belt becomes loose, make sure you have followed steps 1-10 correctly, or see section 2, “Choosing a Suitable Location for the Car Bed” (page 9). DO NOT use this seating location if the seat belt does not hold the car bed very tightly.

29

Image 29

Contents Infant Car Bed Table of Contents Contacting Graco About Your Child Important Safety InformationAbout Using this Car Bed in Your Vehicle About Airbags About the Life and Condition of this Car Bed When the Car Bed is Not OccupiedWhen the Car Bed is Not in the Vehicle Some Basic Requirements Choosing a Suitable Location for the Car BedPage Vehicle Seat Must Face Be Sure Your Vehicle Seat Meets All of These RequirementsConsider Accident Statistics and Information about Airbags Seat Belt Systems that are not Safe for Use with the Car Bed Be Sure Your Vehicle Seat Belt is Safe to UsePage Page Seat Belt Systems that are Suitable for Use with the Car Bed Lap/shoulder combination belt with a lock Locking Clip Features and Components of the Car BedPositioning and Securing Your Child in the Car Bed Lying on back Lying on side Ï Ð Child Securing the Car Bed in Your Vehicle Preparation and Initial Safety Checks Use this buckle Now the vehicle seat belt must be tightened Tightening a lap/shoulder combination belt To install the locking clip Final Safety Checks Cleaning and Maintenance Reinstalling Pad and Harness Fuzzy side Harness UP Ventilation Slots Low side Printed side Ventilation Slots High side Model No Serial No Purchase Date Registering Your Car BedPage Graco Children’s Products Inc Elverson, PA