Graco 8403 owner manual Reinstalling Pad and Harness

Page 31

Reinstalling Pad and Harness

If pad and harness have been removed for washing or replacement, it is very important to properly reinstall them in your car bed. Ventilation slots in pad must be at the same end as ventilation slots in plastic car bed shell, and harness must be positioned to properly hold your child. Follow these instructions.

1.Turn the car bed upside down. With fuzzy side of harness facing UP (see illustration on page 32), thread both ends of the harness into the slots in the car bed as shown. The double shoulder straps MUST be inserted in the harness slot next to the ventilation slots. Make sure straps are not twisted.

2.Turn the car bed right side up. With printed side of pad facing UP, line up the side of the pad that has ventilation holes with the ventilation slots in the car bed. See illustration on page 33.

3.Lower pad into the car bed. Thread the harness straps through the slots in the pad.

31

Image 31 Graco 8403 owner manual Reinstalling Pad and Harness
Contents Infant Car Bed Table of Contents Contacting Graco About Your Child Important Safety InformationAbout Using this Car Bed in Your Vehicle About Airbags About the Life and Condition of this Car Bed When the Car Bed is Not OccupiedWhen the Car Bed is Not in the Vehicle Some Basic Requirements Choosing a Suitable Location for the Car BedPage Vehicle Seat Must Face Be Sure Your Vehicle Seat Meets All of These RequirementsConsider Accident Statistics and Information about Airbags Seat Belt Systems that are not Safe for Use with the Car Bed Be Sure Your Vehicle Seat Belt is Safe to UsePage Page Seat Belt Systems that are Suitable for Use with the Car Bed Lap/shoulder combination belt with a lock Locking Clip Features and Components of the Car BedPositioning and Securing Your Child in the Car Bed Lying on back Lying on side Ï Ð Child Securing the Car Bed in Your Vehicle Preparation and Initial Safety Checks Use this buckle Now the vehicle seat belt must be tightened Tightening a lap/shoulder combination belt To install the locking clip Final Safety Checks Cleaning and Maintenance Reinstalling Pad and Harness Fuzzy side Harness UP Ventilation Slots Low side Printed side Ventilation Slots High side Model No Serial No Purchase Date Registering Your Car BedPage Graco Children’s Products Inc Elverson, PA