Graco 8403 When the Car Bed is Not Occupied, About the Life and Condition of this Car Bed

Page 7

1.4 When the Car Bed is Not Occupied

!The surface of the car bed can become very hot if the car bed is left in the sun. Contact with these parts can burn your child’s skin. Cover the car bed with a blanket if it will be exposed to the sun, and always check the surface of the car bed before putting your child in it.

!Never leave a car bed unsecured in your vehicle. An unsecured car bed can be thrown around and may injure occupants in the event of a sharp turn, sudden stop or crash.

1.5 About the Life and Condition of this Car Bed

!Replace this car bed with a new car bed after an accident of any kind. An accident can cause damage to the car bed that you cannot see.

!After your child has outgrown the car bed, or has moved on to a rear- facing infant restraint, discard the car bed. Never give this car bed to someone else. Destroy the car bed and place it in a garbage bag to assure that it will not be reused.

!Do not use the car bed after the expiration date stamped on the bottom of the car bed shell.

!Do not modify your car bed or use any accessories or parts supplied by other manufacturers.

7

Image 7
Contents Infant Car Bed Table of Contents Contacting Graco About Your Child Important Safety InformationAbout Using this Car Bed in Your Vehicle About Airbags About the Life and Condition of this Car Bed When the Car Bed is Not OccupiedWhen the Car Bed is Not in the Vehicle Some Basic Requirements Choosing a Suitable Location for the Car BedPage Vehicle Seat Must Face Be Sure Your Vehicle Seat Meets All of These RequirementsConsider Accident Statistics and Information about Airbags Seat Belt Systems that are not Safe for Use with the Car Bed Be Sure Your Vehicle Seat Belt is Safe to UsePage Page Seat Belt Systems that are Suitable for Use with the Car Bed Lap/shoulder combination belt with a lock Locking Clip Features and Components of the Car BedPositioning and Securing Your Child in the Car Bed Lying on back Lying on side Ï Ð Child Securing the Car Bed in Your Vehicle Preparation and Initial Safety Checks Use this buckle Now the vehicle seat belt must be tightened Tightening a lap/shoulder combination belt To install the locking clip Final Safety Checks Cleaning and Maintenance Reinstalling Pad and Harness Fuzzy side Harness UP Ventilation Slots Low side Printed side Ventilation Slots High side Model No Serial No Purchase Date Registering Your Car BedPage Graco Children’s Products Inc Elverson, PA