Graco 35 LX manual

5.To create a secure installation, while pushing down on the base, pull the free end of the lap belt or the shoulder portion of the lap/shoulder belt to tighten œ.

6.Close lock-off over lap belt AND free end of the lap/shoulder belt .

œ

NEVER allow any object other than the vehicle
belts to go under or interfere with the lock-off.
If any other part of the vehicle belt interferes
with the lock-off choose another seating location.
MAKE SURE that you push the top of the
lock-off all the way down.
7. Check that belt does not move by pulling
and pushing hard on base with hands near the
vehicle belt path. If belt loosens	
or lengthens, repeat procedure.
8. Push the infant restraint down into the base and
make sure that you hear a “click” ž. Pull up on
the infant restraint to be sure it
is latched securely into the base.	ž
If the infant restraint does not securely latch
into the base, the infant restraint provides NO
protection for your child. DO NOT use the infant
restraint/base if the infant restraint does not
securely latch into the base.

9. Test infant restraint for secure installation as described in infant restraint “Final Safety Check” page 41.

29