Graco ISPB008BC 1/03 manual Changing Harness Strap Slots, Splitter Plate

OPERATIONS and ADJUSTMENTS (continued)

5

ChangingHarnessStrapSlots:

MUST use slots at or just above shoulders.

A Loosen harness straps.

BRemove both harness strap loops from Splitter Plate on back of car seat (fig. e).

CChange harness strap slots.

Make sure harness straps are threaded through matching slot of seat pad and car seat.

It may be necessary to remove seat pad from top of car seat.

DPut right strap loop on Splitter Plate first, then attach left strap loop. (fig. e).

NOTE: Make sure straps are NOT twisted.

Splitter Plate

(fig. e)

18