VEHICLE SEAT BELTS (continued)
Combination Lap/Shoulder Belt with Sliding Latch Plate
With
Harness
System:
Pull on latch plate (fig. c). If belt slides freely through latch plate, a locking clip MUST be used. (See “Locking Clip”section, page 29.)
Without
Harness
System:
This vehicle seat belt system is OK to use with booster car seat.
Movement of the seat belt through the latch plate can allow an active toddler to slide down in car seat and
A Locking Clip may be used on this type of vehicle seat belt to prevent movement of seat belt through latch plate limiting toddler’s movement: (see page 29).
Pull
(fig. c)
28