Testing the System
It is VERY IMPORTANT to test the system when first set up, and at regular times thereafter. Test the units if you suspect they may have been damaged or have not been used for a long time.
1.If two adults are present, have one take the Parent Units to different locations, trying various volume settings, while the other speaks into the Nursery Unit.
2.If only one adult is available, place a ticking clock, radio, or other
3.When testing, keep the level of your child’s sounds in mind, and adjust the volume accordingly.
4.If there is sound interference, switch the Nursery Unit and the Parent Units to the other channel setting.
Operation
To Listen To Baby
• Turn on Nursery Unit using the ON/OFF switch.
• Turn on Parent Unit using the Power/Volume wheel.
• Adjust the volume on the Parent Unit by turning the Power/Volume wheel.
• The Sound Lights on the Parent Unit will illuminate as your child (or other objects) make noise near the Nursery Unit. Please note that the Sound Lights and volume control on the Parent Unit are independent of each other. With the
volume turned all the way down, the Sound Lights will still illuminate as your child (or other objects) make noise near the Nursery Unit.
Vibration Alert Feature
•To turn on the Vibration Alert Feature, set the switch on the
side of the parent unit to ON.
NightLight Feature
•To turn on NightLight slide button on side of Nursery Unit up.
5