Servis-Rhino SR10M, SR15M manual Standard Equipment and Specifications, Operation

OPERATION

OPERATION

Standard Equipment and Specifications

		SR15	SR10
Horsepower Required (Min.)		50 HP	40 HP
Cutting Capacity (Diameter)		3”	3”
Cutting Height		1”-15”	1”-15”
Safety Deflectors*		Standard	Standard
Cutting Width		180”	126”
Transport Width		90-1/2”	88”
Overall Width		186”	133”
Overall Length		183”	183”
Blade Overlap		6”	6”
Weight (Approximate)		4345 lbs.	3910 lbs.
Wing Lift		Hydraulic	Hydraulic
Wing Flex (Degrees)		90° Up-22° Down	90° Up-22° Down
Jack Stand		Standard	Standard
Hitch		Heavy-Duty Clevis	Heavy-Duty Clevis
Blade Carrier		Pan	Pan
Gearbox Rating:**
Power Divider		180 HP	180 HP
Center & Wings		140 HP	140 HP
Output Shaft Diameter		2-3/8”	2-3/8”
Blade Tip Speed
Center	540 RPM	14,861 FPM	14,861 FPM
	1000 RPM	15,570 FPM	15,570 FPM
Wings	540 RPM	14,242 FPM	14,242 FPM
	1000 RPM	14,624 FPM	14,624 FPM
Driveline Size:
Main (44R or CV)		Cat 5	Cat 5
Wings		Cat 4 or 5	Cat 4 or 5
Deck Thickness		10 Gauge	10 Gauge
Side Skirts		1/4”x10-1/2”	1/4”x10-1/2”
Replaceable Skid Shoes		Standard	Standard

*Safety Deflectors are standard equipment. Single and double chain guards are available as extra equipment at extra cost. Servis-Rhino recommends mowers be equipped with deflectors or double chain guards for all mowing purposes. Single chain guards may be used for agriculture purposes only and are specifically not recommended for highway, right-of-way, parks or greenbelt mowing.

**Ratings based on actual field performance.

SR10M/SR15M 10-01 Operation Section 4-4

© 2004 Alamo Group Inc.