ASSEMBLY
WING SECTION HYDRAULIC CYLINDER ATTACHMENT
Mount the 14" stroke Hydraulic Cylinder butt clevis to the upright lugs on the Center Section and the rod end to lugs on wing. Make sure the ports of the Hydraulic Cylinder are facing upwards. Keep the ports capped until the hoses are attached to the tractor and are ready to attach to the cylinder ports. FIGURE 12. Install the Transport Bars to retain the Wing Sections in the upright position for transport on roads and highways. When in transport keep the Center Section as low to the ground as possible to increase stability but high enough to prevent the Skid Shoes from dragging.
Wing Hydraulic
Cylinder
Transport Bar-
Operating Position
FIGURE 12. Wing Section Hydraulic Cylinder Attachment.
COUNTERWEIGHT BOX ATTACHMENT ON TWO SECTION UNITS
Keep everyone clear when lifting, and working under raised components. Block securely before working under mower. Install Weight Box and Weight (Minimum of 700# Total) before operating to prevent turning over the center section which can cause SERIOUS BODILY INJURY or DEATH. Without weight. Do not fold wing. Attach transport strap securely to prevent inadvertent dropping from the transport position and possible CRUSHING INJURY or DEATH.
SR10M/SR15M | Assembly Section |
© 2004 Alamo Group Inc.
