Servis-Rhino SR15M, SR10M Tongue Attachment, Center Axle ATTACHMENT- Level Lift & NON Level Lift

ASSEMBLY

TONGUE ATTACHMENT

Long Tongue FIGURE A

To assemble the long tongue. Align the lugs of the tongue with the top holes of the mainframe hitch plate (1). Insert the pivot pin (2) and fasten with 2 - 3/8" x 1 1/4" bolt (3) and 3/8" locknut (4). To assemble the control rod install a jam nut onto the short rod (5), then thread the short rod (5) into the long rod (6). Align the hole of the short control rod (5) to the top hole of the center lug on the mainframe (7). Insert pin and lock with cotter pins. Align the hole of the long rod (6) to the clevis hitch (8) and insert pin with cotter pin (9).

Short Tongue FIGURE B

To assemble the short tongue align the tongue with the lower holes of the mainframe hitch plate (10). Insert the pivot pin (11) and fasten with 2 - 3/8" x 1 1/4" bolts (12) and 3/8" locknut (13). Align the control rod (14) to the lower hole of the center lug on the mainframe (15). To attach the control rod follow the same procedure as stated in the long tongue.

	Short Tongue	Long Tongue
	Assembly
		Assembly
10	10
	15	7
		1
	11,12,13	2,3,4
		5
	14	6
	8	9
FIGURE B		FIGURE A

CENTER AXLE ATTACHMENT- LEVEL LIFT & NON LEVEL LIFT

Install Center Axle (1) to lugs (2) at rear of Center Section with (2) 1" x 7" lg. bolts (3), and locknuts (4). Figure 2.

4

2

	1	FIGURE 2. Axle Attachment	3
SR10M/SR15M 10-01		Assembly Section 3-3

© 2004 Alamo Group Inc.

ASSEMBLY