Servis-Rhino SR15M, SR10M manual Assembly, Wing Sections Attachments

ASSEMBLY

WING SECTIONS ATTACHMENTS

While the Center Section is still solidly blocked, attach the Wing Sections (1) in the horizontal plane. Using Hinge Pins (2), attach the Right and Left Wing Sections to the Center Sections.

NOTE: Wing Sections may require slight lifting after the Hinge Pin is started to aid pin installation.

Lock the Wing Sections in place with the Hinge Pins. Insert 5/16 x 1-1/2 bolt (3) and locknut (4) at the end of each of the Hinge Pins and tighten securely. FIGURE 5.

FIGURE 5. Wing Sections Attachments

WING AXLE ATTACHMENT- MECHANICAL LEVEL LIFT

Attach the Wing Axles (1) to the Wing Sections (2) with 1 x 7 bolts (3), flatwashers (4), and locknuts (5) on outboard side and 1 x 4-3/4 bolt (6), and locknuts (5) on the inboard side. FIGURE 6.

2

6

	1	3
5	5
	FIGURE 6. Wing Axle Attachment
SR10M/SR15M 10-01	Assembly Section 3-5	R 11-11-99

© 2004 Alamo Group Inc.

ASSEMBLY