OPERATION
Perform scheduled lubrication as specified in the maintenance section.
Inspect each gearbox oil level and replenish if needed. A low oil level is a warning sign that the gearbox may be cracked or its seal is damaged and needs to be replaced.
Ensure all gearbox vents are in place and free from clogs.
Ensure each hydraulic cylinder is installed and retained correctly. Ensure the proper size pins are used to retain the cylinders in place and are secured with pins.
Check for hydraulic oil leaks on the cylinders, along the hydraulic lines, and at tractor hydraulic ports.
IMPORTANT: DO NOT use your hands to check for oil leaks. Use a piece of heavy paper or cardboard to check for hydraulic oil leaks.
Ensure that the mower is equipped and secured with wing brace supports.
Check the condition of the wing hinge pins. Check the condition of the mower axle suspension spring.
Inspect mower tire condition, wheel bearings, and lug nut torque.
Inspect blades and blade bolts for looseness and excessive wear. Make sure the mower is securely blocked up before crawling beneath. Replace damaged, worn, and missing blades as complete sets to maintain rotary balance.
Ensure carrier hub nuts are tightened with the cotter pin inserted and spread.
Inspect the condition of the deck skid shoes and the skid shoe attaching hardware.
SR10M/SR15M | Operation Section |
© 2004 Alamo Group Inc.
OPERATION
