Servis-Rhino SR15M, SR10M manual Driveline Attachment, Wing Driveline Clutch End Attachment

ASSEMBLY

DRIVELINE ATTACHMENT

Remove Divider Gearbox Shield if installed. Remove any tape from Gearbox shafts. Attach the Slipclutch end of the Wing Driveline to the Divider Gearbox. Attach the clamp collar end of Driveline to Wing Gearbox. Tighten bolts evenly to their proper torque. FIGURE 16 & FIGURE 17. Install the Main Driveline with clamp collar to the Divider Gearbox .

WING DRIVELINE
	DIVIDER GEARBOX
SLIP CLUTCH END

NOTE: Divider Gearbox Shield must be
in place to guard connecting yokes and	MAIN DRIVELINE
clutches.

FIGURE 16. Wing Driveline Clutch End Attachment

NOTE: Wing Gearbox Shield must be in place and lowered to guard connecting yokes and clutches.

WING DRIVELINE

CLAMP COLLAR END

FIGURE 17. Wing Driveline Clamp Collar End Attachment

SR10M/SR15M 10-01 Assembly Section 3-11

© 2004 Alamo Group Inc.

ASSEMBLY