Mesa/Boogie Mark IV Amplifier Reverb & Reverb Footswitch, EQ Rocker Switch, Effects Loop Section

REAR VIEW MKIV (Continued)

REVERB & REVERB FOOTSWITCH:

REVERB is a simple

depth control which activates the rich all-tube, three-spring analog circuitry. Even though many players have more modern digital reverbs and delays, there is still something quite pleasant about this natural-sounding,

REVERB	8	4	3	0
			1
	5		2
	6			1
	7
		9	0
GRAPHIC EQ

ON OFF AUTO R2

REMOTE

	REV FTSW.
SATELLITE	SATELLITE EQ
	SIG.
	PATH

SATELLITE SEND

traditional Reverb system that we think you’ll enjoy. The REVERB effect may seem more intense in some modes (such as RHYTHM 1) than in other modes, because each mode has a slightly different EQ character- istic and attack dynamic. This represents normal REVERB operation and is no cause for concern.

The 1/4" jack on the Rear Panel labeled REV FTSW. (as shown in the illustration) allows you control of the REVERB remotely when the (optional) Mesa/Boogie REVERB footswitch is connected. See your nearest Boogie Pro Center for this item or call us directly we’ll be happy to assist you.

EQ ROCKER SWITCH:

This feature was explained earlier in the Graphic EQ section of this manual. Refer back to it if you need help understanding what the function of this switch is.

FUSE

3A SB

117VOLTS 60 HZ

4 AMPS

REVERB	5	43
			10
			2
	6			1
	7
	8			0
	9
GRAPHIC EQ

ON OFF AUTO R2

REMOTE

	REV FTSW.
SATELLITE	SATELLITE EQ
	SIG.

PATH

SATELLITE SEND

SATELLITE CONTROL: EQ & Send Jack

Mesa/Boogie offers two different Satellite companion amplifers that enable you to either reinforce your already amazing tone, or split

and process the signal using the Effects Loop. A simple 60 watt version called the Satellite Sixty, as well as a 75 watt Simul-Class with
										Graphic EQ make up this supportive duo with the Simul-Satellite being the obvious
										choice for most MARK IV owners. In the popular stereo scheme, a processors’ Out-
							REV FTSW.
		5		2						puts feed the two Returns ( Left and Right ) on the MARK IV’S Rear Panel and the
FUSE	REVERB		43							Left Return is then sent on to the matching Satellites’ Input via the Satellite Send jack.
		9		10
		6			1
		7
		8			0
3A SB										This buffered line may then travel across the stage with little or no tonal degradation
	GRAPHICEQ					SATELLITE
4 AMPS									SIG.	due to cable length or impedance mismatching.
117 VOLTS							SATELLITE EQ
50-60 HZ
	ON OFF			AUTO R2						The MARK IV has the ability to control the Simul-Satellite’s Five Band EQ remotely
								PATH
		REMOTE
						SATELLITE SEND
										and automatically - tracking the auto assign function and the Footcontroller choices as

they are used aboard the MARK IV. In this way every nuance and setting of the master amp is relayed to the slave amp creating a truly awesome spread tonally and dynamically.

EFFECTS LOOP SECTION:

This section of the MARK IV is quite sophisticated, offering two LOOPS and a selector switch. The LOOP labled NORMAL stays on

all the time. The other LOOP is switched IN or OUT of the circuit by either the footswitch, the programming rocker switches or the
								external jacks (when the MARK IV is being controlled by a MIDI switcher). Notice that if the switchable
		FX LOOP ON			AUTO		AUTO	LOOP is turned on by the rockers or the external jack, the footswitch cannot turn it back off. Two rocker
		FULL TIME			RHY 1	RHY 2		switches are provided so you can pre-set the LOOP to come on in conjunction with any one or two modes.
								(If an effect is desired on all three modes, use the NORMAL LOOP.) The LOOPS were designed in this way
			FX LOOP		RHY 2		LEAD
								so you can automatically have your effects in when selecting, say, RHYTHM 1 and/or RHYTHM 2, yet still
			LEFT			RIGHT
		SWITCHING		AUTO ASSIGN SWITCHES
			(STEREO)			(MONO)
	SIG.
PATH				FX SEND
		RETURN				RETURN

PAGE 10