Dantax LR-6500 Video Operations, System Configuration OSD On Screen Display, Video Tape Dubbing

Page 23

Video Operations

Playing Video Sources

Note:

When playing videos that feature surround sound, refer to "Available Surround Modes".

1Select the DVD, VIDEO 1, VIDEO 2, AUX 1 mode by pressing the SOURCE(6/n) button

2Play the component corresponding to the FUNCTION selected.

3The picture from the video source can be seen on the TV and the sound from the video source will be heard from the speakers.

Video Camera Connections

VCR, Video Camera Recorder, etc.

Connect the video camera recorder's AUDIO OUT- PUT to the AUDIO (L)/(R) jacks and VIDEO OUT to the VIDEO jack of the AUX 1 INPUT.

System Configuration

(OSD - On Screen Display)

Before using the unit, you will probably want to change the settings for most inputs so that they are properly configured to reflect the use of digital or analog inputs, the type of speakers installed and the surround mode specifics of your home theater system. Remember that since the LR-6500 memorizes the settings for each input individually, you will need to make these adjustments for each input used. However, once they are made, fur- ther adjustment is only required when system compo- nents are changed.

Making Configuration Adjustments

1If another function is selected, press the AMP but- ton.

2Press the OSD button.

The MAIN MENU will appear, and adjustments are made from the individual menus. The menus will remain on the screen for 20 seconds.

3Select an item you want to change using the 5/b buttons.

4Press the ENTER button.

5Press the t button repeatedly until the setting you want to select appears.

AMP

OSD

ENTER

Video Tape Dubbing

2

1Press the SOURCE(6/n) button to select the VIDEO source to be recorded.

2Playback the source.

3Operate VID 1 or VID 2/VCR for recording.

Video/audio signals from the selected VIDEO source can be dubbed to VID 2/VCR only.

MAIN MENU

FUNCTION

SETUP

SURROUND

SETUP

SPEAKER

SETUP

DISTANCE

ADJUST

CH LEVEL

ADJUST

PREFERENCE

SETUP

- 23 -

Page 22 Page 24
Image 23
Page 22 Page 24
Contents LR-6500 If in Doubt Consult a Competent ELECTRI- Cian Important Safety InstructionsIMPORTANTfor U.K.Customers Blue Neutral Brown LiveTable of Contents Back-up Memory Function Before UseRead this before operation Neo6 offers several important improvements as follow DescriptionCenter speaker Description ConnectionsAbout Dolby Pro Logic Front left and right speakersSurround left and right speakers, and surround back speaker Surround back speakersSubwoofer Front left and right speakers, and a center speakerPRE OUT SUB Woofer jack Power cord AC InputAudio Components Video convert Video jackComponent jack Video Components and Advanced Connecting Connecting the supplied AM loop antenna Connecting the supplied FM antennaFront Panel Control FunctionsTV / VID Display Remote Control UnitPower TEST-TDirection Tuning UP/DOWNPreset UP/ Down TOP MenuControl Functions Basic Operations Tone Control Volume knobSurround Mode Selector Sleep Timer FunctionOFF Surround Mode Night ModeMAX MIDSize of Speakers Speaker ConfigurationPower SURR.M Enter Speaker Input the distance from your listening position Balancing relative volume between speakers using Test ToneTuner-Mode Preset MemoryTuner Operation Station SelectionPTY search RDS Radio Data System Remote Controller OnlyVideo Tape Dubbing System Configuration OSD On Screen DisplayMaking Configuration Adjustments Video OperationsFunction Setup System ConfigurationFunction Setup Surround SetupDolby Surround Speaker SetupSpeaker Setup Dolby SurrDistance Adjust Preference Setup CH Level AdjustCode Check Method Controlling other Components Connected to the LR-6500Direct Code Entry Method Manual Search MethodVCR Brand List Programming the RemoteSAT Brand List TV Brand List Erres Pathe Cinema Symptom Cause Solution TroubleshootingPAL / Ntsc SpecificationsDTS Luxman CORPORATION, Japan
Top Page Image Contents