CH Level Adjust, Preference Setup | Dantax LR-6500 specification

System Configuration

FCH LEVEL ADJUST

CH LEVEL ADJUST

FL	:	0dB	SBR	:	0dB
CEN	:	0dB	SBL	:	0dB
FR	:	0dB	SL	:	0dB
SR	: 0dB		SUB	: 0dB
LEVEL DEFAULT			: OFF
TEST TONE SEQ			: AUTO
TEST TONE			: OFF

BACK TO MAIN MENU

GPREFERENCE SETUP

PREFERENCE SETUP

DISPLAY TIME OUT	: OFF
DISPLAY MODE	: FULL
VOLUME DEFAULT	: OFF
DEFAULT VOL SET	: -25dB
SEMI OSD TIME OUT	: 5
FULL OSD TIME OUT	: 20

DEFAULT SURR MODE : ON

BACK TO MAIN MENU

Channel level adjustment is a key part of the configuration of any surround sound product. It is particularly important for a digital receiver such as the LR-6500, as correct out- puts ensure that you hear soundtracks with proper direc- tionality and intensity.

Listeners are often confused about the operation of the sur- round channels. While some assume that sound should always be coming from each speaker, most of the time there will be little or no sound in the surround channels. This is because they are only used when a movie director or sound mixer specifically places sound there to create ambience or special effect, or to continue action from the front of the room to the rear. When the output levels are properly set, it is normal for surround speakers to operate only occasionally. Artificially increasing the volume to the rear speakers may destroy the illusion of an enveloping sound field that duplicates the way you hear sound in a movie theater or concert hall.

Before beginning the output level adjustment process, make certain that all speaker connections have been prop- erly made. The system volume should be set to the level that you will use during a typical listening session

NOTE

You can adjust channel level by pressing the TEST TONE button on the remote control.

•DISPLAY TIME OUT

Select amount of time(3s~10s) that the display to fade out of front panel. Select OFF if you do not wish to the front panel displays fade out.

•DISPLAY MODE

FULL: Normal brightness.

HALF: Half the normal brightness level.

OFF: All of the front panel indicators will go dark.

•VOLUME DEFAULT ON

OFF

•DEFAULT VOL SET

Set the desired turn-on volume. This setting may not be made with the regular volume controls.

•SEMI OSD TIME OUT

The semi-OSD system places one-line message at the video display screen whenever the volume, input source, surround mode, tuner frequency or any of the configura- tion settings are changed.

Set to change the length of time that the semi-OSD dis- plays remain on the screen.

•FULL OSD TIME OUT

The full-OSD menu system is used to simplify the setup and adjustment of the LR-6500, using a series of on screen menus. Set to change the length of time that full-OSD dis- plays remain on the screen.

•DEFAULT SURR MODE

ON: Select if you wish to leave the default so that the mode choice encoded in the disc is always used, no fur- ther action is needed. Simply leave the setting at the fac- tory default of ON.

OFF: Select to set the unit so that it responds to the last surround mode used when a Dolby Digital or DTS source is playing.

- 27 -