System Configuration
5-Channel Stereo, 7-Channel Stereo
This mode takes advantage of multiple speakers to place a stereo signal at both the front and back of a room. Depending on whether the unit has been configured for either 5.1 or 6.1/7.1 operation, one of these modes, but not both, is available at any time. Ideal for playing music in sit- uations such as a party, it places the same signal at the
The center channel is fed a summed mono mix of the in- phase material of the left and right channels.
Stereo
This mode turns off all surround processing and presents the pure left- and
PURE STEREO: When Audio input is selected analog, the unit is in a "bypass" mode with no bass management.
DSP STEREO: When DSP Stereo is selected, the signal is digitized and bass management settings are applied.
CDOLBY SURROUND
When DOLBY SURROUND mode is selected, a menu will be shown.
DOLBY SURR 
MODE : DOLBY PRO LOGIC
CENTER WIDTH :
DIMENSION :
PANORAMA :
NIGHT : OFF
UPSAMPLING :
BACK TO MAIN MENU
The choices on this menu include the selection of the actu- al surround mode, the selection of rear channel
•Center Width: This setting adjusts the balance of the vocal information in the front sound stage between the center and front left/right speakers. The lower settings spread the center channel sound more broadly into the left and right channel s. A higher number (up to "7") pro- duces a tighter center channel presentation.
•Dimension: This setting alters the perceived depth of the surround field by creating a shallower presentation that appears to move sounds toward the front of the room, or a deeper presentation that appears to move the center of the sound field toward the back of the room. The setting of "O" is a neutral default, with the range of adjustment shown as
•Panorama: Switch this setting on or off to add an envelop- ing wraparound presentation the increases the percep- tion of sound along the sides of the room.
•NIGHT
OFF: When OFF is highlighted, the Night mode will not function.
MID: When MID is highlighted, a mild compression will be applied.
MAX: When MAX is highlighted, a more severe compres- sion algorithm will be applied.
•UPSAMPLING
The setting to turn the unit's upsampling feature on or off. In normal use, this feature is turned off, which means that digital sources are processed at their native sample rate. For example, a 48kHz digital source will be processed at 48kHz. However, the
NOTE: This feature is only available for the Dolby Pro Logic
DSPEAKER SETUP
SPEAKER SETUP 
MODE | : SPEAKER SIZE |
LEFT/RIGHT | : SMALL |
CENTER | : SMALL |
SURROUND | : SMALL |
SURR BACK | : SMALL |
SUBWOOFER : SUB
BACK TO MAIN MENU
This menu allows you to switch the menu to change either the speaker size setting or the exact crossover point used for that speaker group. For the first pass through the menu, leave the setting at its default option of SPEAKER SIZE, and then proceed as outlined below. Once the speaker choices have been set, you may wish to return to this line to change the option so that the crossover settings may be adjusted.
- 25 -