Control Features
Engine Stop Switch
The stop switch is a red colored rocker switch located on the
To start and run the engine, this switch must be placed in the on, “Ω”, position.
The vehicle is also equipped with a safety brake switch which will prevent the engine from starting until the parking brake is engaged.
To stop your engine, place the switch to the stop, “ ”, position.
In the stop, “ ”, position the ignition system is grounded preventing the spark plug from firing.
This switch can also be used as a safety or emergency stop switch.
Manual choke lever
All Vector is equipped with a manually operated carburetor choke system. This choke is operated by the lever at the bottom of the left hand control switch.
When first starting the engine,(cold start), place the lever in the full left position, (Choke closed or on). As the engine warms return the lever to the full right position. (Choke open or off).
Throttle lever
The throttle lever is located on the
automatically reduce your speed.
The travel of the throttle lever is controlled by the throttle stop bolt.
As your operator gains more experience, you can increase the throttle travel to allow for additional speed to be obtained.
To increase the throttle’s travel, thus increasing the maximum speed, turn the throttle stop bolt counter clockwise. To decrease the throttle’s travel, thus decreasing the maximum speed, turn the throttle stop bolt clockwise.
Page 9