lightly apply pressure to the throttle until you feel the unit shift and the indicator light confirms the shift has been completed.
If the brakes are not fully applied while shifting the transmission the engine will stop running.
Transmission Oil
The Vector 250 requires
every 3000Km/ 1800 Mi or at the beginning of each riding season which ever come first.
The following steps should be followed when changing the transmission oil.
1.Place a oil catch pan directly below the transmission case.
2.Remove the transmission drain plug located on the bottom of the transmission case on the underside of the unit.
3.Remove the transmission filer plug located on the upper right hand side of the transmission case above the transmission shifting linkage rod.
4.Allow the oil to drain completely (15- 30min).
5.Reinstall the transmission drain plug and torque to
6.Fill the transmission case with
7.Reinstall the transmission filler hole plug and torque to
8.Dispose of used oil at a proper recycling station as required by law
Tires and Wheel inspection
It is important to inspect your tires and wheels for damage and wear before each riding session. Inspect each tire for cuts, tears and punctures. Inspect the wheel rim for dents and separation of the wheel from the tire bead.
Page 15