Lanier LASER 200 Locatethetailwheelbracketand parts, Trialfitthe4-40 rodsand clevison the servos

LANIER – 1/3rd Scale Laser 200 ARF -INSTRUCTIONS

37.Useastraightedgeto align theelevatorand ruddercontrolhornslocation.

42. Locatethetailwheelbracketand parts.

38.Installthehornson theelevatorhalveswith (4) 4-40 screwsin each horn going through to the backing plate.

39.Installtherudderhornsby securing them with

(4)4-40 screwsand (4)nylon lock nuts.

40.Installyourservo arm s (Dubro heavy duty,not included)on theservos.

41.Trialfitthe4-40 rodsand clevison the servos

and horns,the5 1/2”rodsarefortheelevatorhalves, the10”rodsarefortherudder. Two solder clevisareusedon therudderrods. Trim therods to length asneeded. W hen thelengthsare determ inedandallsurfacesarecentered,lockthe clevison therod with locktite.(You can also solderoneclevisin position ifyou wanttobe very secure) Also installthecleviskeeperson theclevispins.

43.Fasten thetailbracketattherearofthefusewith two #6 ½screws. Drilltwo 3/32”pilotholes beforeinstalling.Installso theangleisaligned with theedgeoftheverticalstabilizer.

.

44.Locatethespringsforthetail,and preparethe endsby bending aloop on each end.

45.Installaspring on each sideoftherudder. Shortenthespringsifneededtoputeventension on thearm sand keep theaxlecentered.

© 2002 LanierR/C Page-7