Using the surface units.
Throughout this manual, features and appearance may vary from your model.
How to Set
Push the knob in and turn in either direction to the setting you want.
At both OFF and HI the control clicks into position. You may hear slight clicking sounds during cooking, indicating the control is keeping the power level you set.
Be sure you turn the control knob to OFF when you finish cooking.
Dual Surface Unit Switch
|
| The right front surface unit has 2 cooking | To use the large (9 inch) surface unit, push |
|
| sizes to select from so you can match the size | in the LARGE BURNER portion of the switch. |
9" | 6" | of the unit to the size of the cookware you |
|
|
|
|
are using.
To use the small (6 inch) surface unit, push in the SMALL BURNER portion of the switch.
Indicator Lights
A HOT SURFACE indicator light will glow as | A surface unit ON indicator light will glow | |
any radiant element heats up, and will | when any surface unit is on. | |
remain on until the surface is cool enough | NOTE: The surface unit ON indicator light may glow | |
to touch. | ||
between the surface control settings of LO and OFF, | ||
| but there is no power to the surface units. |
Safety Instructions
Instructions | Operating |
Installation
Care and CleaningTroubleshooting Tips
Instructions
7