7 | From the front, pull |
pad off the shell, | |
| starting at the top. |
| Lift pad over the |
| harness strap |
| holders and work |
| the pad around the |
| harness adjustment |
| cover. |
Hand wash with warm sudsy water, rinse clean and air dry. Do not use bleach or other harsh cleaners. Do not dry clean.
Spot clean harness straps. Do not machine wash.
Replace pad by reversing order. Reinstall harness (see “Preparing Child Restraint to Fit Your Child” section).
Troubleshooting
✔1. If your child restraint is not held securely by the belt:
Press down firmly on the child restraint and remove all the slack in the belt. Make sure the belt buckle is not up against the child restraint where the belt cannot be tightened. Review “Locking Clip” and “Adjusting the Top Anchorage Strap” sections. If you cannot secure the child restraint tightly, move it to another seating location.
✔2. If the child restraint buckle or harness adjustment lever sticks or you cannot get the straps tight enough around child:
DO NOT LUBRICATE. Check around buckle and harness release lever for dropped food, sticky spilled drinks, dirt, leaves, etc. Clean with warm water and/or remove object with tweezers. If you cannot get the harness to adjust and remain tight with the buckle securely locked, do not use the child restraint.
✔3. If your harness twists or ropes:
Straighten the harness each time you put your child in the seat to help prevent twisting. Lock the buckle and tighten harness and it will be ready for next use.
44 | 45 continued on next page. |