Uniden UDW10055 user manual Connecting to Your TV, Reducing pixellation

Page 13

Connecting to Your TV

You can connect the receiver to any standard television with RCA composite video inputs.

Television with standard RCA composite inputs (maximum 32 inches diagonal recommended)

Audio (white)

Video (yellow)

AV out

AC adapter (already connected)

To use bandwidth efficiently, the system compresses the video signal using Motion-JPEG; the system then digitizes the signal before transmitting it to provide a secure video link. This method is optimized for wireless connections, but it can cause an indented image line (“ghosting” or JPEG artifacts) on larger television displays or plasma screens.

Reducing pixellation

When video is put on a very large screen, you can often see the edges of each pixel in the image. There are a few ways to reduce the amount of pixellation on your TV:

►►

►►

►►

Zoom out on the receiver: at the zoomed in size, some pixellation will always occur. Don't use a television larger than 32 inches (32-inch diagonal display).

Don't use a "stretch" or "zoom" setting on your television; set your television to display the image as it receives it from the system.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents If You Contact Uniden’s Phone Number What’s in the BoxImportant Safety Instructions Contents Getting Started Connect the PowerTry Icon What it means Check the Video SignalLearning Your System Using the Camera StandGet to Know the Camera What the lights meanMount the stand Switch the bracketAttach the camera Adjusting the Sun ShieldWhat the buttons do Get to Know the ReceiverButton What it does What the connections do Connector Use it toCAM4 Using the MenuUnderstanding Night Vision Using Zoom ModeReducing pixellation Connecting to Your TVPairing Cameras Multiple Camera FeaturesSome things to know about pairing cameras Changing to a Different Camera No SignalSetting Up a Scan To enter quad display Using Quad DisplayIf… Try Solving ProblemsWeak signal and video performance Unstable or Weak SignalPossible Cause Solution Noise or Static Resetting the camera Resetting the receiver Resetting Your SystemImage Specification Product SpecificationsSystem Specifications Camera Receiver Additional InformationRechargeable Batteries Must Be Recycled or Part 15 Compliance StatementDisposed of Properly Radio Equipment Notice RF Exposure InformationCanada
Top Page Image Contents