Uniden UDW10055 user manual Getting Started, Connect the Power, Try

Page 4

Getting Started

Connect the Power

1. Connect the standard AC adapter to the receiver’s power input.

POWER

button

2.Attach an antenna to the rear of each camera and connect an AC adapter to the camera’s power input pigtail. (If necessary, connect the extension cord to the camera’s pigtail and connect the AC adapter to the extension cord.)

AC Adapter

3.Connect the other end of each adapter to a 120 volt AC (standard indoor) power outlet, and press the Power button on the side of the receiver.

Antenna

AC Adapter

4.Make sure

the Power status lights on the front of the receiver and each camera all turn on.

OK

Power status lights

If...	Try...
a Power status	--reconnecting the AC adapter
light doesn’t	--seeing if the power outlet is
come on	controlled by a wall switch

4

Image 4

Contents What’s in the Box If You Contact Uniden’s Phone NumberImportant Safety Instructions Contents Getting Started Connect the PowerTry Check the Video Signal Icon What it meansUsing the Camera Stand Learning Your SystemGet to Know the Camera What the lights meanSwitch the bracket Mount the standAdjusting the Sun Shield Attach the cameraWhat the buttons do Get to Know the ReceiverButton What it does Connector Use it to What the connections doUsing the Menu CAM4Using Zoom Mode Understanding Night VisionConnecting to Your TV Reducing pixellationPairing Cameras Multiple Camera FeaturesSome things to know about pairing cameras No Signal Changing to a Different CameraSetting Up a Scan Using Quad Display To enter quad displaySolving Problems If… TryWeak signal and video performance Unstable or Weak SignalPossible Cause Solution Noise or Static Resetting Your System Resetting the camera Resetting the receiverProduct Specifications Image SpecificationSystem Specifications Camera Receiver Additional InformationRechargeable Batteries Must Be Recycled or Part 15 Compliance StatementDisposed of Properly RF Exposure Information Radio Equipment NoticeCanada