Uniden UDW10055 user manual Changing to a Different Camera, No Signal

Page 15

Changing to a Different Camera

►► On the receiver, press to cycle through the enabled channels from CAM1 through CAM4. After the last enabled channel, the receiver goes back to the first camera.

1

2

3

4

►► Each time you press , the receiver goes to the next enabled channel, regardless of whether there is a camera present on that channel. If there is no camera signal on a particular channel, the receiver shows a black screen with the message No Signal.

1

2

3

4

NO SIGNAL

►►

►►

You should only turn a channel On if you have a camera paired to that channel. The receiver skips any channels that are set to Off in the menu.

1

2

3

4

(Channel CAM2 set to Off.)

15

Image 15

Contents If You Contact Uniden’s Phone Number What’s in the BoxImportant Safety Instructions Contents Connect the Power Getting StartedTry Icon What it means Check the Video SignalWhat the lights mean Using the Camera StandLearning Your System Get to Know the CameraMount the stand Switch the bracketAttach the camera Adjusting the Sun ShieldGet to Know the Receiver What the buttons doButton What it does What the connections do Connector Use it toCAM4 Using the MenuUnderstanding Night Vision Using Zoom ModeReducing pixellation Connecting to Your TVMultiple Camera Features Pairing CamerasSome things to know about pairing cameras Changing to a Different Camera No SignalSetting Up a Scan To enter quad display Using Quad DisplayIf… Try Solving ProblemsUnstable or Weak Signal Weak signal and video performancePossible Cause Solution Noise or Static Resetting the camera Resetting the receiver Resetting Your SystemAdditional Information Product SpecificationsImage Specification System Specifications Camera ReceiverPart 15 Compliance Statement Rechargeable Batteries Must Be Recycled orDisposed of Properly Radio Equipment Notice RF Exposure InformationCanada