First-Time Operation
Powering the Camcorder | 5 Plug the power cord into a power outlet. |
from an AC Outlet | The POWER indicator on the AC adapter |
will light. | |
1 Slide the battery compartment door | 5 |
release on the bottom of the camcorder in | |
the direction of the arrow (Q), to open the |
|
battery compartment door (W). |
|
4
POWER indicator
Removing the DC Cable from the
Camcorder
2 Slide the cable notch cover in the direction of the arrow shown in the diagram.
Cable Notch
Cover
3 Insert the DC cable connecting plate into the compartment (Q), pass the DC cable through the battery compartment notch, and then close the battery compartment door firmly (W).
Notch
1 Slide the battery compartment door release and open the door.
2 Press the lock as shown (Q), remove the cable from the notch and then remove the DC cable (W).
Lock
Notch
Note:
•The DC cable can be easily removed by facing the camcorder down at an angle.
Cautions:
•Turn the Power switch off before removing the DC cable.
•When removing the DC cable, grasp the connecting plate, not the cable itself, and pull it out of the compartment.
Using an Optional Plug Adapter
4 Insert the cable plug into the DC OUT jack on the supplied AC adapter.
An optional plug adapter may be required in some countries.
Optional AC | AC |
| |
Plug Adapter |
|
1 Plug the adapter/charger’s plug into the AC plug adapter.
2 Plug the AC plug adapter into the AC
outlet.10
