Connections and Editing

Recording from an External Source

You can use this camcorder to record or edit video from another source, such as a VCR, TV, or video disc player.

Connect the camcorder to the source equipment, using the Docking Station and audio/video cable, as shown.

Recording

To Record from an External Source

1 Set the Power switch to VCR.

2 Start sending audio/video signals from the source equipment connected to the Docking Station. Check the camcorder's monitor to see if the picture is being properly received.

3 Press the REC START/STOP button on the camcorder to start recording.

To S-video Output Connector

Playback

Yellow: To VIDEO Jack

Red: To AUDIO R Jack

White: To AUDIO L Jack

Yellow: To VIDEO OUT

Jack

Red: To AUDIO

OUT (R) Jack

White: To AUDIO

OUT (L) Jack

Source Equipment

Operation Button

Note:

• To pause recording, press

 

on the operation

 

 

button ( ) on the camcorder. Press the button

TV With Monitor Output

VCR

Video Disc Player

Notes:

If the source equipment has an S-video output connector, connect it to the S-VIDEO connector on the Docking Station with the supplied S-video cable.

If the source equipment has only one audio output jack, use the white plugs for the audio connection on the source equipment and Docking Station.

Automatic Switching of the Audio/ Video Jack’s Input/Output Mode

The AUDIO/VIDEO jack’s mode is normally set to input. It automatically switches to output when the camcorder is playing back.

again to resume recording.

To Stop Recording

Press Aon the button on the camcorder.

Caution: The unauthorized recording of television programs and other materials may infringe the rights of others.

56

Page 60
Image 60
RCA ProV950HB manual Recording from an External Source, To Record from an External Source, To Stop Recording, Playback