RCA ProV950HB manual Specifications, Signal System Ntsc standard, AC Adapter/Battery Charger

Specifications

Signal System: NTSC standard

Recording System: 2 rotary heads, helical scanning system Cassette: 8 mm video tape, MP type or Hi8 MP, ME type

Recording/Playback Time: 120 minutes (P6-120) Tape Speed: 14.345 mm/second

Pickup Device: 1⁄4 ″ (6.4 mm, effective size: 4.5 mm) CCD image sensor (with approx. 410,000 pixels including optical black)

Lens: 12× power zoom lens (F1.8, f=4.2–50.4 mm), full-range auto focus

Lens Filter Diameter: 37 mm

Monitor: 4″ (10.1 cm)—full-color LCD screen (TFT active matrix) Microphone: Electret stereo microphone

Power Requirement: DC 3.6 V

Power Consumption: 7.1 W (during camera recording in full auto mode with zoom motor off, backlight in normal mode)

Operating Temperature: 0°C to ‘40°C (32°F to 104°F) Operating Humidity: 30% to 80%

Storage Temperature: −20°C to ‘60°C (−4°F to 140°F)

Dimensions (approx.): 715⁄32″ (W) × 419⁄32″ (H) × 313⁄16″ (D) [190 mm (W) × 117 mm (H)× 97 mm (D)]

Weight (approx.): 1.8 lbs (820 g) (without battery pack, lithium battery, video cassette)

AC Adapter/Battery Charger

Power Requirement: AC 100–240 V, 50/60 Hz DC Output: 4.5 V

Power Consumption: 25 W

Dimensions (approx.): 4 3⁄4″ (W) × 2 ″ (H) × 4″Ê (D) [120 mm (W)× 51 mm (H) × 101.5Ê mm (D)] Weight (approx.): 0.86 lbs (390 g)

Specifications are subject to change without notice.

INFORMATION TO USER

This device complies with Part 15 and Part 18 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2)this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device and RF lighting device pursuant to Part 15 and Part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

68