First-Time Operation
Installing the Lithium Cell in the Camcorder
1 Slide the release and open the cassette compartment door. (The cassette holder opens automatically.) Pull out the cell holder using a pointed object such as the point of a pen, as shown.
Cassette Compartment Door Release
WARNING: Replace cell only with
Cautions:
Lithium cells must be disposed of properly. Never handle punctured or leaking cells. May cause burns or personal injury.
Keep out of the hands of children. Can cause death or injury if swallowed. If swallowed, consult a physician immediately for emergency treatment.
The lithium cells used in these devices may explode resulting in a fire or chemical burn if mistreated. Do not recharge, disassemble, heat above 212º F (100ºC), or incinerate.
Never use metallic tweezers to hold the cell, and never short circuit the + and - sides of the cell.
Notes:
•The lithium cell is used to back up the calendar and other memory functions.
•The battery will last about one year of normal usage.
•Replace the battery with a new CR2025 cell when the camcorder’s time indicator starts to fall behind the correct time.
2 Insert the supplied lithium cell into the holder with the ‘ side facing outward.
Installing the Lithium Cell in the Remote Control
1 Hold the remote control face down. Then pull out the cell holder while pressing the tab toward the center.
3 Insert the cell holder back into its compartment, and push it in completely.
4 Press the “PUSH” mark until the cassette holder clicks into place. Then, close the cassette compartment door firmly until it clicks.
“PUSH” mark
2 Install the supplied CR2025 lithium cell with its ‘ side matching the j marked side of the cell holder into the cell holder.
3 Insert the cell holder in the direction of the arrow. Make sure that the j side faces the back of the remote control.
6
