First-Time Operation

Warning Indicators

Display for the first

Display after the first

 

Description of Warning

 

3 seconds

3 seconds

 

 

 

 

 

 

 

 

 

EJECT THE CASSETTE.

EJECT THE CASSETTE.

 

The video cassette is defective and should be

 

removed.

 

 

 

 

 

 

 

 

 

 

 

Dew has formed inside the camcorder. Wait for a

 

 

 

 

 

few hours until the dew disappears (see page 63).

 

 

 

 

 

About ten seconds after this warning appears, the

 

 

 

 

 

camcorder and display turn off.

 

 

 

 

 

 

 

 

 

 

 

The battery is almost depleted.

BATTERY IS TOO LOW.

 

 

 

 

Note: Operation of the zoom may interrupt the

 

 

 

 

 

 

 

 

 

 

camcorder power. Replace the battery pack.

 

 

 

 

 

 

 

 

 

 

 

The video heads are clogged and should be

 

 

 

 

 

cleaned (see page 63).

 

 

 

 

 

 

INSERT A CASSETTE.

 

 

 

 

There is no tape cassette in the camcorder.

 

 

 

 

Load a cassette.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The red erasure protect tab in the video cassette

CASSETTE NOT RECORDABLE.

 

 

 

 

has been slid to the record-protect position, pre-

 

 

 

 

 

venting recording.

 

 

 

 

 

 

THE TAPE ENDS SOON.

 

 

 

 

The tape is about to end. Get ready to load a new

 

 

 

 

cassette.

 

 

 

 

 

 

 

 

 

 

CHANGE THE CASSETTE.

 

 

 

 

The tape has reached its end.

 

 

 

 

Load a new cassette.

 

 

 

 

 

 

 

 

 

 

 

The fluorescent lamp behind the LCD monitor is

REPLACE THE LAMP.

REPLACE THE LAMP.

 

close to the end of its service life. Replace it with a

 

new one (see page 57). The LCD monitor turns off

 

 

 

 

 

about one minute after this warning is displayed.

 

 

 

 

 

 

 

 

 

 

 

During Self Recording mode, every warning indi-

 

 

 

 

 

cator is replaced by a “ ” indicator displayed in

 

 

 

 

 

the center of the monitor. To check the meaning of

 

 

 

 

 

the warning, rotate the monitor back to the normal

 

 

 

 

 

position.

 

 

 

 

 

 

Note:

indicates a blinking display.

16

Page 20
Image 20
RCA ProV950HB manual Indicates a blinking display