RCA ProV950HB manual Counter Memory, Turning Off the LCD Monitor Backlight

Basic Operations Playback

Counter Memory			5 Press C on the				button to select “REW”
Use the counter memory when you want to return			on the		screen. The tape will automatically
			stop when the counter reaches 0:00.00.
to the beginning of a particular scene. The
position where the counter memory is reset,
							PLAY STILL
(0:00.00) is stored in memory to make it easier to						0	0 0 0 0
return the tape to that point.						R
							F
1 During playback or recording, press the						E
							F
						W
MENU button until		(VCR mode) or
(Camera mode) appears on the monitor.							STOP
			6 Press		on the		button to select “PLAY”
	STOP WATCH
			on the		screen to view the desired scene.
		M	To Cancel the Counter Memory Mode
		E
		N
		U	Perform step 1. Then press A on the operation
	COUNTER		button ( ) to select “COUNTER” and then press
2 Press A on the button to select “COUNTER”			C on the	button to select “MEMORY”. “M” will
			disappear. The Counter Memory mode is now
then press C on the		button to select	canceled.
“MEMORY”. “M” will appear to the left of the			Notes:
counter display.			• In Step 5, Bon the				button can be used to select
			“FF” in the same way.
		M	• This function does not work during video searches.
		E	• In step 5, the tape may stop slightly ahead or
		N

Ubehind the point where you reset the counter to “M 0:00.00”.

COUNTER

PREV. PAGE 0 3 1 0 8

MR

EE

M

OS

RE

YT

Memory Indicator

3 Press B on the button to select “RESET” at the beginning of a scene you want to return to later.

PREV. PAGE 0 0 0 0 0

MR

EE

M

OS

RE

YT

4 After playback, press A on the button to select “STOP” on the screen. If you have been recording, stop the tape and set the Power switch to VCR.

Turning Off the LCD Monitor Backlight

This camcorder’s LCD monitor uses a fluorescent lamp for backlighting (see page 57). In order to reduce battery consumption, you can turn off the lamp when backlighting is not necessary (e.g. when you are watching a playback on a connected TV’s screen).

While the camcorder is in Camera or VCR mode, hold down the MODE DISPLAY button for more than 5 seconds. The backlight will turn off and the LAMP OFF indicator will light.

To turn it on again, press the MODE DISPLAY button or set the Power switch to OFF, and then back to CAMERA or VCR.

MODE

DISPLAY MENU

LAMP OFF

Indicator

Notes:

• The LAMP OFF indicator will blink when the monitor is off to indicate that there is a warning message. Press the MODE DISPLAY button and check the message on the monitor.

• Turning the LCD monitor on and off repeatedly may deplete battery power.

38