RCA ProV950HB manual Picture/Backlight Adjustments, When the Camcorder is in VCR Mode

Picture/Backlight Adjustments 5

Operation Button

MENU Button Power Switch

Press C or B on the button to adjust the picture or backlight to your preference.

				ITEM
		BACKLIGHT		NORM.		BRIGHT
		BRIGHT
	S	COLOR						S
	E	TINT						E
	T	PREV.	PAGE	ITEM				T
BRIGHT							NORM.
		Darker		Brighter			BRIGHT
COLOR
		Decrease		Increase
TINT		R			G
		Red		Green

First-Time Operation

If the picture is difficult to see due to ambient lighting, etc., adjust the monitor picture.

1 Set the Power switch to CAMERA.

2 Press the MENU button until appears on the monitor.

STOP WATCH

M

E

N

U

AUTO

COUNTER

3 Press C on the operation button ( ) to select “PICTURE”.

STOP WATCH

M

E

N

U

4 PressAor on the button to select the menu item you wish to adjust.

		ITEM
	BACKLIGHT	NORM. BRIGHT
	BRIGHT
S	COLOR	S
E	TINT	E
T	PREV. PAGE	T

6 When you are finished, press the MENU button to turn off the adjustment display.

When the Camcorder is in VCR Mode

Press the MENU button until appears on the monitor. Then perform steps 3 through 6 as shown.

Notes:

•In bright daylight, the monitor picture will be easier to see if you set the backlight (“BACKLIGHT”) to “BRIGHT”.

•The picture adjustments have been factory preset to neutral settings, and the backlight mode (“BACKLIGHT”) has been factory preset to normal (“NORM”).

•When the color or tint is adjusted, the picture on the screen may differ from the picture actually recorded. Do not change the color and tint settings unless it is necessary.

ITEM

21